Special Functions - MATTRESS FIRM 900 POWER BASE Owner's Manual

Special Functions

Using the mounted USB ports
The convenient USB ports located on each side of your adjustable bed
provides easy access for charging today's tech devices.
Activating the emergency power down feature
The power supply unit on your adjustable bed supports the emergency power down feature if a power failure occurs
while the head, lumbar, and/or foot sections are raised.
1
Locate and remove the cover on the 9V battery compartment in
the power supply unit.
2
Install two (2) alkaline 9V batteries (not included with the
adjustable bed).
3
Replace the battery cover.
4
When the 9V batteries are installed and a power failure occurs,
press and hold the button on the power supply unit until the bed
returns to a flat position.
NOTE: The two (2) 9V batteries are for single use only. After lowering
the adjustable bed once during a power failure, replace with a
new set of batteries.
Connecting your bed to a smart device
Your adjustable bed is equipped with the Bluetooth technology that enables your iOS or Android smart device to
interact with your bed through the Mattress Firm 900 mobile application.
1
Make sure that your adjustable bed is plugged to a working and
grounded electrical outlet and the control box is on.
2
Download and install the Mattress Firm 900 mobile application
from the App Store or Play Store.
3
For iOS users, turn on your Bluetooth. For Android users, turn on
your Bluetooth and Location settings.
Open the app, and then navigate to the Settings screen. From
4
the list of visible devices, select your adjustable bed.
Once connected, use the controls on the Lifts/Presets and
5
Massage screens of your app to operate your adjustable bed.
NOTE: The remote control cannot be used while the adjustable
bed is connected to the application.
13