Hardware Installation; Hardware Operation - StarTech.com VS721MULTI User Manual

Hardware Installation

Connect the Desired Audio Video Input Cables (sold
1.
separately) from each video source device (i.e. computer,
Blu-ray Player) to the Video Input Ports (3 x HDMI®, 1 x VGA,
1x Component YPbPr, 1 x Composite CVBS, 1 x S-Video) on
the Switcher.
Connect an HDMI® cable (sold separately) from the HDMI®
2.
enabled display device (i.e. television, projector) to the
HDMI® Output Port on the Switcher.
Turn on the display device, followed by the video source
3.
devices.
(Optional) For RS232 Remote Serial control, connect the
4.
included RS232 Serial Cable from a computer to the RS232
Serial port on the Switcher.

Hardware Operation

Manual Port Selection
1.
Press the Input Selection Button that corresponds with the
•
video source device you would like displayed.
The selected Active Port LED Indicator will light, and the
•
desired video source device will be displayed on the
HDMI® enabled display device.
Remote Control Port Selection
2.
Press the desired 1 - 7 key on the remote control that
•
corresponds with the number above the Active Port LED
Indicator.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
8