Connecting To External Equipment; Connecting A Blu-Ray Disc/Dvd Player Or; Hd Cable/Satellite Set-Top Box - Sharp AQUOS LC-52LE925UN Operation Manual

Connecting to External Equipment

You can connect many types of external equipment to your TV. To view external source images, select the input
source from INPUT on the remote control unit or on the TV. (See pages 13 and 21.)
For connecting the TV to external equipment, use commercially available cables.
CAUTION
• To protect equipment, always turn off the TV before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box
■ When using HDMI cable (HDMI 1, 2, 3 or 4):
The HDMI (High Defi nition Multimedia Interface) terminal is an audio-video interface that enables a connection for audio and
video signals using a single cable. The HDMI terminal supports high-resolution video input.
• Blu-ray disc player

• HD cable/satellite set-top box

HDMI OUT
• To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a component cable and
set the equipment to 1080p output.
• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
• When you connect external equipment using a DVI-HDMI conversion cable or when you connect ARC-compatible
equipment, use HDMI 1.
■ When using DVI-HDMI conversion cable (HDMI 1):
• Blu-ray disc player
• HD cable/satellite set-top box
AUDIO DVI OUT
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN
terminal and set "Audio Select" to "HDMI+Analog". (See page 59.)
14
• DVD player
HDMI-certified cable
• DVD player
Ø 3.5 mm stereo minijack cable
DVI-HDMI conversion cable
Back panel
vertical inputs
Back panel
vertical inputs