Sharp AQUOS LC-52LE925UN Operation Manual page 46

Enjoying 3D Image Viewing
Switching from 3D to 2D Mode
4
Press 3D during the 3D mode.
Select "Yes" and press ENTER to switch to 2D
mode.
Yes
• Take off the 3D Glasses and turn off the power.
Ending 3D Image Viewing
5
Take off the 3D Glasses and turn off the power.
• Press the power button for at least 2 seconds.
• The LED light lights for 2 seconds.
• If the input signal switches to 2D, 2D images are displayed
automatically.
• 3D mode is canceled automatically when the setting is
changed, input selection is changed, or the power is
turned off.
Receiving a 3D Image Signal That Cannot
Be Detected Automatically
1
Press 3D.
• A screen appears prompting you to select between 3D
and 2D image viewing.
3D
2
Press c / d to select "3D" or "2D", and then press
ENTER.
• To view in 3D mode: Select "3D", and then go to step 3.
• To view in 2D mode: Select "2D", and then go to step 6.
3
Press c / d to select the 3D signal type ( "2D➝3D",
"Side by Side" or "Top and Bottom") and then press
ENTER.
2D -> 3D
Select to convert regular 2D picture to 3D.
• If you select the same system as that of the input signal,
3D images are displayed.
4
Turn on the 3D Glasses and place them on your
head.
• Press the power button for at least 2 seconds.
• The LED light blinks 3 times.
5
You can now view 3D images.
44
No
2D
Side by Side Top and Bottom
Switching from 3D to 2D Mode
6
Press c / d to select the 2D signal type ( "Side by
Side" or "Top and Bottom") and then press ENTER.
Side by Side
Select when two images are displayed next to each other.
• If you select the same system as that of the input signal,
2D images are displayed.
• Take off the 3D Glasses and turn off the power.
Ending 3D Image Viewing
7
Take off the 3D Glasses and turn off the power.
• Press the power button for at least 2 seconds.
• The LED light lights for 2 seconds.
Watching 2D Images in 3D
You can convert normal 2D images into 3D images.
1
Press 3D.
2
Press c / d to select "2D➝3D convert", and then
press ENTER.
3
Turn on the 3D Glasses and place them on your
head.
• The TV returns to 2D mode after 1 hour has passed.
Switching to the Previous Mode
You can switch back to the previous mode by pressing 3D.
1
Press 3D.
• A confi rmation screen is displayed.
Yes
2
Select "Yes" and then press ENTER.
• The TV returns to the previous mode.
3D Menu
Pressing 3D in 3D mode displays the 3D menu. Press
the colored buttons to make the necessary settings.
A: 3D Brightness Boost (See page 45.)
B: 3D Surround (See page 28.)
The surround mode changes each time you press B.
C: 2D➝3D Convert Effect (See page 45.)
D: 3D Setup (See page 45.)
Top and Bottom
No