Initial Installation - Sharp AQUOS LC-52LE925UN Operation Manual

Watching TV
Antenna & Cable/STB
Select the type of connection you will use to
watch TV.
3
Press c / d to select "Antenna & Cable" or "Set-
top box", and then press ENTER.
• To watch TV via an antenna or cable connection
(without using a set-top box), select "Antenna & Cable",
and then go to step 4.
• To watch TV via a set-top box, select "Set-top box".
Make sure to change INPUT to the specifi c input
terminal you are connecting your set-top box. See
the operation manual of the connected equipment for
setting up the equipment.
Antenna & Cable
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your
TV when selecting "Air" or "Cable".
4
Press c / d to select "Air" or "Cable".
Press ENTER to enter the setting.
Air
CH Search (Channel search)
Channel auto search makes the TV look for all
channels viewable in the set area.
5
When "Air" is selected in Antenna setting:
Press c / d to select "Start", and then press
ENTER.
Start
When "Cable" is selected in Antenna setting:
Press a / b to select "Analog & Digital Search
Start" to search both analog and digital broadcasts,
or to select "Analog Search Start" to search only
analog broadcasts, and then press ENTER.
Analog & Digital Search Start
Analog Search Start
• The Channel search will start automatically.
• To exit the Channel search screen, select "Cancel",
and then press ENTER.
Set-top box
Cable
Cancel
Cancel
Completed
6
The settings confi rmation screen is displayed.
Confi rm the information displayed on the screen,
and then press ENTER.
Examples of the settings confi rmation screen
When one or more channel is received after
"Antenna & Cable" was selected in step 3 and a
search was carried out.
Language
TV Location
Anntena & Cable/STB
Air/Cable
Search Result
Press the INPUT button,
then the right arrow d,
to see the list of channels found.
When no channel is received after "Antenna &
Cable" was selected in step 3 and a search was
carried out.
Language
TV Location
Anntena & Cable/STB
Air/Cable
Search Result
Channel not found.
Antenna/Cable are not properly connected
or Air/Cable setup is incorrect.
Please check your Antenna/Cable connection
and Air/Cable setup.
When "Set-top box" was selected in step 3 and a
search was carried out.
Language
TV Location
Anntena & Cable/STB
Please make sure to change INPUT to the
specific input terminal you are connecting
your set-top box to get the picture.
Closed caption, sub-channel audio
and channel selection need to be selected
with your set-top box.
• If no channel is found, confi rm the type of connection
made with your TV and try "EZ Setup" again.
(See page 33.)
• For changing the settings of the Initial Installation, perform
"EZ setup" on the Initial Setup menu on page 33.
• To see the list of channels found during Channel search,
press INPUT, and then press
: English
: Home
: Antenna & Cable
: Air
: Digital 4ch
Analog 7ch
OK
: English
: Home
: Antenna & Cable
: Cable
: No channel
OK
: English
: Home
: Set-top box
OK
d
.
19