Connecting To External Equipment - Sharp AQUOS LC-32LE450U Operation Manual

Connectin l to External Equipment
You can connect many types of external equipment to your T_. To view external source images, select
the input source from INPUT on the remote control unit or on the TV. (See pages 15 and 22.)For
connecting the TV to external equipment, use commercially available cables.
Connecting to External Equipment
• When using Component cable (Component):
• To protect equipment, always turn off the TV before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making
connections.
• When using HDMI cable (INPUT 1 or 2):
The HDMI (High Definition Multimedia Interface) terminal is an audio-video interface that enables a
connection for audio and video signals using a single cable. The HDMI terminal supports high-resolution
video input.
HDMI-cert(fied cable
• To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a
component cable and set the equipment to 1080p output.
• See page 19 for connecting a Blu-ray disc player,DVD player or an HD cable/satellite sat-top box to the HDMI
terminal.
• To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a
component cable and set the equipment to 1080p output.
• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
• When using DVI-HDMI conversion cable (INPUT 1):
• When using Composite cable (AUlDO/VIDEO):
r
[]
AV cable
O 3.5 mm stereo minijack cable
,_ DVI-HDMI conversion cable :_ .....
_ ]_ :i_:_ _ _--,
AV cable
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in
addition to connecting a DVI-HDMI conversion cable to the HDMI 1/DVI IN terminal, connect a
© 3.5 mm stereo minijack cable to the AUDIO PC/HDMI terminal.
_- 16 _- 17