Table of Contents
Advertisement
Quick Links
LC-52LE925UN
LC-60LE925UN
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN
IMPORTANT
: Please read this operation manual before starting operating the equipment.
IMPORTANT
: Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.
IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
®
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for Sharp AQUOS LC-52LE925UN
Summary of Contents for Sharp AQUOS LC-52LE925UN
- Page 1 LC-52LE925UN LC-60LE925UN LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANT : Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil. IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
-
Page 3: Important Information
LC-52LE925UN LC-60LE925UN LIQUID CRYSTAL TELEVISION IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. -
Page 4: Declaration Of Conformity
IMPORTANT INFORMATION DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-52LE925UN/LC-60LE925UN This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 5: Dear Sharp Customer
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. - Page 6 IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,...
- Page 7 • Do not drop or place unnecessary stress on it when assembling and attaching the stand. • Be sure to not accidentally hit the glass part of the stand with a sharp or hard object, as it may cause the glass to break.
-
Page 8: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 3D Glasses Prevention of accidental ingestion • Keep the batteries and band accessory out of the reach of small children. Small children can accidentally swallow these parts. – If a child accidentally swallows any of these parts, seek immediate medical attention. Do not disassemble •... -
Page 9: Table Of Contents
IMPORTANT INFORMATION ..... 1 DEAR SHARP CUSTOMER ..... . . 3 IMPORTANT SAFETY INSTRUCTIONS . -
Page 10: Supplied Accessories
Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit ( g 1) Page 9 “AAA” size battery ( g 2) Page 10 ■ Operation manual ( g 1) ■ Connection guide ( g 1) •... -
Page 11: Quick Installation Tips
IMPORTANT: IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP. 17´ (5 m) 30º 30º 30º... -
Page 12: Preparation
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. -
Page 13: Part Names
Part Names TV (Front) VOL l / k TV (Rear) Antenna/Cable in COMPONENT terminals *1 See pages 13 to 17 and 54 for external equipment connection. *2 See page 59 for details on the Audio Select function. INPUT POWER *2 MENU *1 OPC: Optical Picture Control *2 See pages 18 and 24 for using the touch sensor panel. -
Page 14: Remote Control Unit
Part Names Remote Control Unit • When using the remote control unit, point it at the TV. POWER: Switch the TV power on or enter standby. (See page 18.) TV, STB, DVD•VCR, AUDIO: Switches the remote control for TV, STB, DVD, BD, VCR and AUDIO operation. (See pages 52 to 53 for details.) * To enter the code registration mode, you need to press an appropriate button (STB, DVD•VCR or AUDIO) and... -
Page 15: Introduction To Connections
Cable HDMI-certified cable Ø 3.5 mm stereo minijack cable DVI-HDMI conversion cable Component video cable Audio cable Ø 3.5 mm to 3 RCA AV cable (or QCNW-A702WJZZ from SHARP) Example Example Press INPUT. • The INPUT list screen displays. Menu Menu Press a / b to select the input source. -
Page 16: Connecting To External Equipment
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 13 and 21.) For connecting the TV to external equipment, use commercially available cables. -
Page 17: Connecting A Vcr, Game Console, Camcorder Or Cable/Satellite Set-Top Box
Component video cable (Red) (Blue) Y (Green) Back panel horizontal inputs (commercially available: ø 3.5 mm to 3 RCA AV cable) or (QCNW-A702WJZZ from SHARP) Pin number Description AUDIO (LEFT) Composite Video A&V Ground (EARTH) AUDIO (RIGHT) AUDIO-R (Red) AUDIO-L (White) -
Page 18: Connecting An Audio Amplifi Er
Connecting to External Equipment Connecting an Audio Amplifi er ■ When using optical fi ber cable: It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 31 for details.) PCM audio outputs from the terminal. OPTICAL DIGITAL AUDIO INPUT •... -
Page 19: Connecting A Pc
Connecting to External Equipment Connecting a PC Refer to page 59 for a list of PC signals compatible with the TV. ■ When using HDMI cable (HDMI 1, 2, 3 or 4): HDMI OUT • Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable to the HDMI 1 terminal, connect a Ø... -
Page 20: Watching Tv
Watching TV Turning On/Off the Power POWER POWER (On/Standby) Press POWER on the TV or on the remote control unit to turn the power on. • The Initial Installation starts when the TV powers on for the fi rst time. If the TV has been turned on before, the Initial Installation will not be invoked. -
Page 21: Initial Installation
Watching TV Antenna & Cable/STB Select the type of connection you will use to watch TV. Press c / d to select "Antenna & Cable" or "Set- top box", and then press ENTER. • To watch TV via an antenna or cable connection (without using a set-top box), select "Antenna &... -
Page 22: Direct Button Operation
Direct Button Operation Changing Channels You can change channels in several ways. Method 1 Using CH on the remote control unit or on the TV. Method 2 Using remote control buttons 0-9, • (DOT). Examples: To select a 1 or 2-digit channel number (e. g., Channel 5): Press 5 ENT. -
Page 23: Av Mode
Direct Button Operation AV MODE AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. -
Page 24: Closed Captions And Digital Closed Captions
Direct Button Operation Closed Captions and Digital Closed Captions Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider. -
Page 25: View Mode
Direct Button Operation VIEW MODE You can select the screen size. Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu. -
Page 26: On-Screen Display Menu
• The order of explanations for each menu item in the following pages is not necessarily in accordance with the alignment of the items on the screen. LCFONT: • This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy- to-read characters on LCD screens. Menu Operation Buttons... -
Page 27: Menu Items
On-Screen Display Menu Menu Items • When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu may be changed. • Some menu items may not be displayed depending on the selected input source. Picture Settings AV MODE (Changing Pic.Quality) ... -
Page 28: Picture Settings
On-Screen Display Menu Picture Settings Adjusts the picture to your preference with the following picture settings. Example Menu Picture Settings Picture Settings AV MODE (Changing Pic.Quality) [STANDARD] [Off] Backlight [ b5] a16 3D Brightness Boost [Middle] Contrast [b30] Brightness [ 0] a30 Color [ b2] a30 Tint... -
Page 29: Color Temp
On-Screen Display Menu Color Temp. (Color Temperature) For a better white balance, use color temperature correction. High: White with bluish tone Mid-High: Middle: Mid-Low: Low: White with reddish tone White balance can be adjusted between a maximum of +30 and a minimum of –30 for each color temperature. R Gain (LO/HI): –30 through +30 G Gain (LO/HI): –30 through +30 B Gain (LO/HI): –30 through +30... -
Page 30: Audio Settings
On-Screen Display Menu Audio Settings You can adjust the sound quality to your preference with the following settings. Example Menu Audio Settings Audio Settings Auto Volume [Off] Treble [ 0] a15 Bass [ 0] a15 Balance 3D Surround [Off] Bass Enhancer [On] Reset Clear Voice... -
Page 31: Power Control
On-Screen Display Menu Power Control Power control setting allows you to save energy. Example Menu Power Control Power Control Audio Only Power Saving Standard] No Signal Off [Disable] No Operation Off [Disable] Press MENU to display the MENU screen, and then press c / d to select "Power Control". -
Page 32: System Options
On-Screen Display Menu System Options Example Menu System Options System Options View Option 3D Setup AQUOS LINK Setup Input Terminal Setting Menu Design Operation Lock Out Icon Light Up Setting Demo Mode Press MENU to display the MENU screen, and then press c / d to select "System Options". -
Page 33: Input Terminal Setting
On-Screen Display Menu Change CC Allows you to change the Closed Caption display. Select "Change CC" on the menu to display the Closed Caption information. • The information displayed varies depending on the program you are watching. • You can change Closed Caption by pressing CC on the remote control unit. -
Page 34: Caption Setup
On-Screen Display Menu Caption Setup This function allows you to adjust the closed caption screen appearance to suit your preference. You can adjust 7 items: "Caption Size", "Font Style", "Foreground Color", "Foreground Opacity", "Background Color", "Background Opacity" and "Character Edge". Example: Selectable items available for "Font Style". -
Page 35: Initial Setup
On-Screen Display Menu Initial Setup Example Menu Initial Setup Initial Setup EZ Setup Broadcasting Setup Internet Setup Language [English] ® DivX Setup Individual Setup Wall Mount Audio Setup [No] FAV APP Key Assign Reset Press MENU to display the MENU screen, and then press c / d to select "Initial Setup". -
Page 36: Antenna Setup-Digital
On-Screen Display Menu Antenna Setup-DIGITAL In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confi rm the antenna confi guration through the "Antenna Setup- DIGITAL" screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength. Signal Strength: The signal strength of DIGITAL channel is displayed. - Page 37 On-Screen Display Menu V-Chip V-CHIP is an electronic fi ltering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable.
- Page 38 On-Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
-
Page 39: Information
On-Screen Display Menu Information Example Menu Information Information Identification Digital Caption Info. Software Update Netflix Help Vudu Help Press MENU to display the MENU screen, and then press c / d to select "Information". Press a / b to select a specifi c adjustment item, and then press ENTER. - Page 40 To check for the availability of a software update, visit http://www.sharpusa.com/products/support/. If you have any questions, please call 1-800-BE-SHARP (800-237-4277). CAUTION • Do not remove the USB memory device or unplug the AC cord while the software is being updated.
- Page 41 On-Screen Display Menu Press ENTER to start checking the data in the USB memory device. Insert the USB memory device containing the software update file. During the data checking, “Checking” blinks. Now checking the data in the USB memory device. Checking •...
-
Page 42: Enjoying 3D Image Viewing
Enjoying 3D Image Viewing You can use special 3D Glasses to watch 3D-supported images on this TV. • You can enjoy 3D movies on this TV by viewing the movie through the 3D Glasses supplied with the TV or through optional 3D glasses sold separately. -
Page 43: 3D Glasses
Enjoying 3D Image Viewing 3D Glasses Supplied Accessories for 3D Glasses Make sure the following accessories are provided with the 3D Glasses. Two sets of 3D Glasses are provided. 3D Glasses (×2) Pages 42 to 44 Glasses case (×2) * Use the 3D Glasses band and nose pad as needed. •... - Page 44 Enjoying 3D Image Viewing Attaching the Nose Pad Attach either of the supplied nose pads as needed (such as when the glasses do not fi t properly). The glasses come with a large and small nose pad. Attaching the nose pad Removing the nose pad Attaching the 3D Glasses Band Attach the supplied 3D Glasses band strap as needed...
-
Page 45: Viewing 3D Images
Enjoying 3D Image Viewing Using the 3D Glasses Turning On/Off the Power Turn on the power of the 3D Glasses. • Press the power button for at least 2 seconds. • The LED light blinks 3 times. Turn off the power on the 3D Glasses. •... - Page 46 Enjoying 3D Image Viewing Switching from 3D to 2D Mode Press 3D during the 3D mode. Select “Yes” and press ENTER to switch to 2D mode. • Take off the 3D Glasses and turn off the power. Ending 3D Image Viewing Take off the 3D Glasses and turn off the power.
-
Page 47: Configuring The Tv Settings To Enhance
Enjoying 3D Image Viewing Confi guring the TV Settings to Enhance 3D Image Viewing Example Menu Picture Settings Picture Settings AV MODE (Changing Pic.Quality) [STANDARD (3D)] [Off] Backlight [ b5] a16 3D Brightness Boost [Middle] Contrast [b30] Brightness [ 0] a30 Color [ b2] a30 Tint... -
Page 48: Specifi Cations - 3D Glasses
Enjoying 3D Image Viewing • These 3D Glasses are only for use with Sharp LCD TVs supporting 3D. 3D Glasses lenses ■ • Do not apply pressure to the lenses of the 3D Glasses. Also, do not drop or bend the 3D Glasses. -
Page 49: Enjoying Photo/Music/Video Playback
Enjoying Photo/Music/Video Playback You can enjoy viewing photos, listening to music and watching videos from external USB memory devices. • Depending on the USB memory device, the TV may not be able to recognize the recorded data. • Use only alphanumeric characters for naming fi les. •... -
Page 50: Photo Mode
Enjoying Photo/Music/Video Playback Photo Mode Viewing Thumbnails Example picture 1 picture 2 picture 3 ■ Buttons for thumbnail operations Buttons Description a / b / c / d Select a desired item. ENTER Display the photo. RETURN Return to the previous process. A (red) Select the images to be displayed. - Page 51 Enjoying Photo/Music/Video Playback Select Slide Show Interval Specify the length of time before the next image appears. Press D to display the USB MENU screen. Press a / b to select "Select Slide Show Interval", and then press ENTER. a / b Press to select "5sec"...
-
Page 52: Music Mode
Enjoying Photo/Music/Video Playback Music Mode Example music 1 music 2 music 3 SONG_01.MP3 SONG_02.MP3 SONG_03.MP3 SONG_04.MP3 SONG_05.MP3 SONG_06.MP3 SONG_07.MP3 SONG_03.MP3 0:14 / 4:35 ■ Buttons for music mode Buttons Description a / b / c / d Select a desired item. ENTER Play music. -
Page 53: Usb Memory Device Compatibility
Enjoying Photo/Music/Video Playback ■ Using the control panel You can use the control panel for video playback operations. You can call up this operation panel by pressing a / b MENU after you press to select "USB Operation Panel" from "System Options" > "View Option". System Options PLAY 0:04:11 / 0:07:42... -
Page 54: Other Viewing Options
Other Viewing Options Presetting Remote Control Function You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, BD, LD) using the presetting manufacturer function of your remote control unit. Presetting manufacturer codes Press an appropriate button (STB, DVD AUDIO) to operate the connected equipment. - Page 55 S.ATLANTA VIEWSTAR ZENITH • Numbers marked with * are SAT codes, all others are STB codes. AUDIO BRAND SHARP SHARP (SOUND BAR) NUMBER REMOTE CONTROL CODE NUMBER 04, 05 04, 05 02, 03, 10, 11, 17, 20 02, 03, 10, 11, 12, 20,...
-
Page 56: Using Aquos Link
Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifi er, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certifi ed cables to the TV, you can control a recorder or AV amplifi... -
Page 57: Aquos Link Setup
Using AQUOS LINK AQUOS LINK Setup Example Menu System Options System Options AQUOS LINK Setup AQUOS LINK Control [On] Auto Power On [Yes] Selecting Recorder Channel Select Key Audio Return Channel [Auto] Press MENU to display the MENU screen, and then press c / d to select "System Options". -
Page 58: Link Operation Menu
Using AQUOS LINK One Touch Recording This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINK- compatible equipment with a recording function by REC on the remote control. simply pressing Prepare the connected AQUOS LINK-compatible recorder for recording. -
Page 59: Link Operation Menu
Using AQUOS LINK Using the Device Operation Panel You can use the device operation panel to control playback operations. Press OPTION to display the Link Operation Menu screen. Press a / b to select “Device Operation Panel”, and then press ENTER. Press a / b / c / d to select the desired operation. -
Page 60: Using A Pc
Using a PC Displaying a PC Image on the Screen VIEW MODE You can select the screen size. Press VIEW MODE. • • Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu. -
Page 61: Adjusting The Pc Image
Using a PC Example Menu System Options System Options View Option 3D Setup AQUOS LINK Setup Input Terminal Setting Menu Design k O t Press MENU to display the MENU screen, and then press c / d to select "System Options". Press a / b to select "Input Terminal Setting", and then press ENTER. -
Page 62: Pc Control Of The Tv
Using a PC PC Control of the TV • The TV can be controlled from a PC using the RS- 232C or IP. • Use a cross-type RS-232C cable, ETHERNET cable (commercially available) or wireless LAN USB adapter for the connections. •... - Page 63 Using a PC ■ Command table • Commands not indicated here are not guaranteed to operate. CONTROL ITEM COMMAND PARAMETER POWER ON COMMAND SETTING R S P W 1 _ _ _ On [RS-232C] 2 _ _ _ On [IP] P O W R 0 _ _ _ Power Off POWER SETTING 1 _ _ _ Power On...
-
Page 64: Using The Internet
Using the Internet • By connecting your TV to a broadband system, you can access the Internet from the TV. • Display the “Sidebar Widget” on the screen to check out the latest Internet information and access a range of useful information for AQUOS users from the original home page*. - Page 65 For a wireless LAN connection, you must use "Wireless Setup" to connect the access point and TV. (See page 64.) • Do not use a wireless LAN USB adapter other than the supplied Sharp wireless LAN USB adapter, as operations cannot be guaranteed.
-
Page 66: Internet Setup
Using the Internet Internet Setup Example Menu Initial Setup Initial Setup EZ Setup Broadcasting Setup Internet Setup Language [English] ® DivX Setup Connection Type Press MENU to display the MENU screen, and then press c / d to select "Initial Setup". Press a / b to select "Internet Setup", and then press ENTER. -
Page 67: Displaying Updated Information And Support Service
You must agree to the terms and conditions when using Live Support. Mail Center: Stay connected with SHARP news and more! Learn More: Learn more about the many benefi ts of AQUOS Advantage membership available to you. -
Page 68: Entering Text (Software Keyboard)
Using the Internet Entering Text (Software Keyboard) When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. • You can enter up to 128 characters for text. The text you enter is displayed as you type it in. -
Page 69: Using The Browser
Using the Internet Using the Browser ENTER, a / b / c / d a / b / c / d • Press to select a link that you want to jump, and then press ENTER. EXIT • Press the button to return to the TV screen. RETURN •... - Page 70 Using the Internet Using the Toolbar You can use the toolbar to control the browser and to specify settings. Press D on the remote control unit to display the toolbar. Press c / d to select a function, and then press ENTER.
- Page 71 Using the Internet Saving the URL of the Current Page Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. Display the page that you want to bookmark. Press D on the remote control unit to display the toolbar.
- Page 72 Using the Internet Browser Settings You can check or modify your browser settings from the Browser menu. The Browser menu includes a display settings menu and a security settings menu. Press D to display the toolbar. Press c / d to select “ ”...
-
Page 73: Enjoying Movies And Some Other Applications
1 Press a / b to select "no-start my FREE trial", and then press ENTER. The screen of the TV 2 Subscribe by visiting http://www.netfl ix.com/sharp from your PC. 3 Press a / b to select "I’m now a member", and then press ENTER. -
Page 74: Netfl Ix Help
Using the Internet Using your PC, visit http://www.netfl ix.com/activate, and then enter the activation code displayed in step 5. The screen of the PC • After a period of time, the TV will be activated, and the empty instant Queue screen will be displayed. Adding Content to the Instant Queue To add a movie to the instant Queue of the TV, select the "Add to Instant"... -
Page 75: Enjoying Movies And Internet Applications
Using the Internet Enjoying Movies and Internet Applications with VUDU You can enjoy movies and Internet applications with VUDU. VUDU Movies is the leading HD on-demand video service. VUDU Movies is built into your TV and utilizes your existing Internet connection to deliver the highest quality on-demand video available today. -
Page 76: Vudu Help
Using the Internet If the Settings on the PC Are Incorrect The screen as shown below will be displayed. Following the instructions on the screen, send e-mail again and make all the necessary settings. Example Operational buttons during playback Buttons Description τ... - Page 77 Sharp shall not be liable to you or any third party for your failure to abide by such authorization or terms of use.
-
Page 78: Appendix
Appendix Removing the Stand • Before detaching (or attaching) the stand, unplug the AC cord. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. ■ LC-52LE925UN Before attaching/detaching the stand •... -
Page 79: Setting The Tv On The Wall
Setting the TV on the Wall CAUTION • This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. -
Page 80: Troubleshooting
Appendix Troubleshooting Problem • No power • Unit cannot be operated. • Remote control unit does not operate. • Picture is cut off/with sidebar screen. • Strange color, light color, or color misalignment • Power is suddenly turned off. • No sound Possible Solution Check if you pressed POWER on the remote control unit. -
Page 81: Troubleshooting - 3D Images
Appendix Problem • No picture • Picture quality of HD programs is poor. • The TV sometimes makes a cracking sound. • The original home page cannot be displayed. • Some Internet functions used on a PC are not available from the TV. Troubleshooting - 3D Images Problem •... -
Page 82: Trademarks
• Products that have earned the ENERGY STAR effi ciency. • This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. However, other fonts are used for some screen pages, too. • “x.v.Color” and are trademarks of Sony Corporation. -
Page 83: Specifi Cations
The dimensional drawings are shown on the inside back cover. • As part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units. -
Page 84: Wireless Lan Usb Adapter
Specifi cations Wireless LAN USB Adapter This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 85: Information On The Software License For This Product
The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties. -
Page 86: Calling For Service
WHICH VARY FROM STATE TO STATE. The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are permitted. - Page 88 NOTE...
-
Page 89: Dimensional Drawings
Dimensional Drawings LC-52LE925UN (1157) LC-60LE925UN (1334.2) (1260) (400) (1439) (400) Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) (540) AN-52AG4 (39) (158) (340) (67) (106) (580) AN-52AG4 (39.7) (174) (368) (67) (106.7) (39) (39.7) -
Page 90: Sharp Corporation
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in Mexico Imprimé au Mexique Impreso en México TINS-E845WJZZ 10P08-MX-NM...