3D Glasses - Sharp AQUOS LC-52LE925UN Operation Manual

Enjoying 3D Image Viewing

3D Glasses

Supplied Accessories for 3D Glasses
Make sure the following accessories are provided with the 3D Glasses. Two sets of 3D Glasses are provided.
3D Glasses
(×2)
Pages 42 to 44
Glasses case
(×2)
* Use the 3D Glasses band and nose pad as needed.
• The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
• Please contact your local authority for the correct method of disposal of this product and/or packaging.
Part Names
3
4
5
3D Glasses band *
(×2)
Page 42
Cleaning cloth
(×2)
1 2
1
2
3
6 4
5
6
• Do not soil or apply stickers or other obstacles to the
• Interference from other infrared communications equipment
(Large ×2, small ×2)
Precision screwdriver
(Phillips ×2, slotted ×2)
Power button
•
Press for at least 2 seconds to turn on and off the 3D
Glasses.
•
When the 3D Glasses are turned on, pressing this
button switches between 2D and 3D modes.
LED light
• Blinks 3 times when the power is turned on.
• Blinks 2 times when 2D mode is selected.
• Blinks 3 times when 3D mode is selected.
• Blinks 6 times when the battery power is low.
• Lights for 2 seconds when the power is turned off.
Service terminal
This terminal is for service use only.
Please do not connect any other device to this terminal.
Infrared receiver
Receives an infrared signal sent from the TV. The 3D
Glasses turn off automatically after 3 minutes if no signal
is received from the TV.
Nose pad mount
The dedicated nose pad can be mounted here. (See
page 42.)
3D Glasses band mount
The dedicated 3D Glasses band can be mounted here.
(See page 42.)
infrared receiver. Doing so may block signals from the TV
and prevent the 3D Glasses from working correctly.
may prevent you from viewing 3D images correctly.
Nose pad *
Page 42
Page 42
41