Keyboard Mode - Philips KWR101830/01B Manual

KWR101830/01B
Manual (Draft Version)
3.4.1 Mouse Mode
Default mode for mouse mode = OFF when first power up or upon a power recycle.
There will be LED indication on TV POWER button on the activation and deactivation of motion
sensor.
Mouse mode will be disabled if user entered programming mode, i.e. IR Learning with mouse mode
ON; user needs to press MOUSE key again if mouse function is needed after exiting programming
mode.
Downstream command from host can also toggle Mouse mode ON/OFF. Both MOUSE (TOGGLE)
key and downstream command have equal priority, hence the last trigger will supersede previous
state.
- Mouse mode code will be sent upon a reset cycle either during power recycle or watchdog reset.
- Mouse mode code will be sent when user pressed the MOUSE key
- Mouse mode code will be sent after each downstream command
- Mouse mode code will be sent after any other feature (e.g. IR Learning mode) that changes Mouse
ON/OFF state.

3.5 Keyboard Mode

The Qwerty keyboard will be held by both hands and used in landscape orientation.
The keyboard also supports secondary keys by using FN, CAPS or Alt Gr; this allows the keyboard
to support uppercase characters, symbols and digits with the limited number of Qwerty keys.
There are 2 ways of activating secondary keys:
1. Press and release FN or CAPS or Alt Gr key followed by pressing another key. For example, press
FN then Q will send „1‟ , press CAPS then Q will send „Q‟ . After Q is released and pressed again,
„q‟ will be sent.
2. Press and hold FN or CAPS or Alt Gr key followed by pressing another key. For example, press
and hold FN and then press Q will send „1‟ , press and hold CAPS and then Q will send „Q".
As long as the secondary key is pressed and held, the secondary character will have the same
repeating behavior as the normal primary key „press and hold‟ .
To minimize accidental presses of the Qwerty keys while in RC or Mouse Cursor Control, the Qwerty
keys will be deactivated. When not in SLEEP mode and the keyboard side is detected faced down,
the Qwerty keys will be locked, key presses on the keyboard will be ignored. When device is not in
SLEEP mode and the keyboard side is detected faced up, the Qwerty keys are unlocked.
3.5.1 Other Key Codes
When "ALTGr" + "Space" is pressed, F10 key code will be sent from the RC.
Status :Draft, For Review
Page 8 of 14
Philips Proprietary &Confidential
Philips Home Control Company Restricted