Page 2
Philips Home Control FCC Statement FCC Part 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
3.2.7 Code set ID setup for a device 3.2.8 Stuck Key time out function 3.2.9 Simultaneous Keypress 3.2.10 Standby mode EAL TIME REQUIREMENTS DEFAULT IR CODE UTTON AND ODE APPING Status :Draft Page 3 of 8 Philips Home Control Company Restricted...
KWR164501/01 1. Introduction 1.1 Purpose This document of KWR164501/01 should be understood by all people with sufficient knowledge of the application domain. Status :Draft Page 4 of 8 Philips Home Control Company Restricted...
2. General product description 2.1 Product functions This KWR164501/01 product is a RF (2.4GHz) keyboard + RF(2.4GHz) & Infrared Remote (IR). From the whole system point of view, the TV will be the host; the remote is a dummy slave.
IR transmit When the keyboard facing to the user side, pressing any keyboard button will trigger the product send key event to the TV. 3.2 Description of system The features of this KWR164501/01 as follows: • Default TV IR mode •...
KWR164501/01 3.2.1 Default Vizio BT TV IR mode This is the default mode when user takes KWR164501/01 out of box, it will able to transmit IR code for TV IR receiver without any setup after insert battery. 3.2.2 Normal operation mode This is the normal operation when TV is turns on;...