Related Manuals for Philips KWR101803/01B
Summary of Contents for Philips KWR101803/01B
- Page 1 Philips Home Control Manual of KWR101803/01B ©Philips Home Control, Confidential Page 1 of 10 2011...
- Page 2 Philips Home Control FCC Statement FCC Part 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 3: Table Of Contents
ONTROL OUSE ............................ 8 EYBOARD IR FUNCTIONALITY .......................... 9 .............................. 9 EARN ‐ .......................... 9 EARN FUNCTION ESET UNIVERSAL RC FUNCTION ......................... 10 Status :Draft, For Review Philips Proprietary &Confidential Page 3 of 10 Philips Home Control Company Restricted... -
Page 4: Product Description
IR Learn using DataFlash. (optional) • Universal IR database for TV. (optional) • IR used 32K or 64K Flash chip. • Low voltage alert through LED blinks. Status :Draft, For Review Philips Proprietary &Confidential Page 4 of 10 Philips Home Control Company Restricted... -
Page 5: Product
KWR101803/01B Manual (Draft Version) 1.2 Product Picture for illustration only Status :Draft, For Review Philips Proprietary &Confidential Page 5 of 10 Philips Home Control Company Restricted... -
Page 6: Functional Requirements
Low voltage detection triggers when the battery voltage is at low level. Upon any key press or upon last key press, the LED will do 10 Quick Blinks to indicate low power. Status :Draft, For Review Philips Proprietary &Confidential Page 6 of 10 Philips Home Control... -
Page 7: Rf Functions
Receiver, RF link will be re-connected automatically. No RF re-pairing is needed. 3.6 RF Out of Range When the RF link broken/ out of range, RC goes to SLEEP immediately to conserve power. Status :Draft, For Review Philips Proprietary &Confidential Page 7 of 10 Philips Home Control Company Restricted... -
Page 8: Operational Features
This allows the KB to support Numbers and Symbols with the limited number of QWERTY keys. Example, press ALT + Q will send ‘1’. Status :Draft, For Review Philips Proprietary &Confidential Page 8 of 10 Philips Home Control Company Restricted... -
Page 9: Ir Functionality
This is done by pressing its TV key simultaneously with the GUIDE key for 3s. LED shall do 2 Quick Blinks. The RC shall return to its original settings; i.e. before any learning was performed. Status :Draft, For Review Philips Proprietary &Confidential Page 9 of 10 Philips Home Control... -
Page 10: Universal Rc Function
MUTE to test the code. The STANDBY LED will always turn ON during database mode. No key is active when the LED is blinking. Status :Draft, For Review Philips Proprietary &Confidential Page 10 of 10 Philips Home Control Company Restricted...