Opc Setting; Color Management System); Opc; Backlight - Sharp Aquos LC 26GD4U Operation Manual

Basic adjustment settings

OPC setting

Automatically adjusts the brightness of the screen.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Picture".
3
Press a/b to select "OPC".
4
Press c/d to select "On" or "On: Display".

OPC

Off

Backlight

[ +8] –8

Contrast

[+30] 0

Brightness

[ 0] –30

Color

[ 0] –30

Tint

[ 0] –30

Sharpness

[ 0] –10

Advanced

Reset
Selected item
The brightness is fixed at the value set in
Off
"Backlight" (see page XX).
On Automatically adjusts
On: Display Displays the OPC effect on the screen while
adjusting the brightness of the screen.
NOTE
• When set to "On", the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.
• When set to "On: Display", OPC effect displays on the
screen while OPC is adjusting the screen brightness.
On On : Display
+8
+40
+30
+30
+30
+10
Description
C.M.S. (Color Management System)
Color tone is managed using the six-color adjustment
setting.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Picture".
3
Press a/b to select "Advanced", and then
press ENTER.
4
Press a/b to select "C.M.S-Hue", and then
press ENTER.
• You can select "C.M.S-Saturation" or "C.M.S-
Value" here instead of selecting "C.M.S-Hue".
5
Press a/b to select a specific adjustment
item. Press c/d to adjust the item to your
desired position.
C. M. S.-Hue
C. M. S.-Saturation
C. M. S.-Value
Changing reds
closer to
magenta or yellow.
Reset
Selected item
C.M.S-Hue This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S-
Increases or decreases the saturation of a
Saturation selected color.
C.M.S- A higher value makes the image brighter.
A lower value makes the image darker.
Value
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select "Reset", and then press
ENTER.
R [ 0] –30 +30
Y [ 0] –30 +30
+30
G [ 0] –30
C [ 0] –30 +30
B [ 0] –30 +30
+30
M [ 0] –30
Description
33