Connecting Hdmi Equipment; Displaying An Image From Hdmi Equipment - Sharp Aquos LC 26GD4U Operation Manual

Using external equipment

Connecting HDMI equipment

You can use the INPUT 4 terminal when connecting an HDMI equipment.

Displaying an image from HDMI equipment

1
To watch an HDMI equipment image, select
"INPUT4" from "INPUT SOURCE" menu
using INPUT on the remote control unit or
on the Display. (See page 66.)
INPUT SOURCE
TV
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Option".
4
Press a/b to select "HDMI Setup", and then
press ENTER.
[ Option ... HDMI Setup ]
MENU
Option
Audio Only
Digital Noise Reduction
HDMI Setup
Output Select
Quick Shoot
Center Channel Input
Caption Setup
54
HDMI cable
(Commercially available)
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5 INPUT5
i.LINK
CARD
[Low]
[Fixed]
[Off]
[Off]
HDMI equipment
5
Press a/b to select the desired item and
press ENTER.
6
Press a/b/c/d to select the desired setting
and press ENTER.
HDMI Setup
Selectable items
items
Signal Auto/RGB/YCbCr
Type 4:4:4/YCbCr 4:2:2
Color Auto/ITU601/
Matrix ITU709
Dynamic Standard/
Range Out of standard
Auto View Enable/Disable
NOTE
• Refer to your external equipment operation manual for
the signal type.
Description
Select the signal type from
an HDMI terminal. Unless
the image quality looks
obviously poor, select Auto.
Select the internal color
space conversion method
when an RGB signal is
input. Normally, select
Auto.
Select the signal amplitude
range. Normally, select
Standard.
Set whether or not to use
VIEW MODE based on
signal recognition,
including an HDMI signal.