Recording A Still Image; Displaying A Still Image; Displaying Slide Show - Sharp Aquos LC 26GD4U Operation Manual

Using memory card

Recording a still image

You can record a still image on the card.
1
Press FREEZE.
Cooking Time
2
Press REC.
Cooking Time
• "Still image captured on card." displays.
3
Press ENTER to update the still image.
Cooking Time
NOTE
The list of broadcasting type or input signal not available
for recording:
1 COMPONENT input
2 HDMI input
3 DVI-I input
4 Card picture
5 Copy guarded signal
6 V-chip blocked program
7 i.LINK input
8 DTV Program
44
Still
Onion x 1
Tomato x 1
Potato x 1
Still
Onion x 1
Still image captured on card.
Tomato x 1
Potato x 1
Still

Displaying a still image

1
Press CARD and the card mode screen
displays.
2
Press c/d to select "Still", and then press
ENTER.
3
Press a/b/c/d to select a file you want to
display, and then press ENTER.
Still
File 1
File 4
File 7
• To display the files that are in the previous or
next page, select c/d on the index screen and
press ENTER.
• When viewing a still image, by pressing VIEW
MODE the image size changes. Normal – Full.
This function does not work when displaying
the index screen.

Displaying slide show

1
Repeat steps 1 to 3 in Displaying a still image
above.
• The operation panel displays.
CARD ... STILL
SLIDE SHOW STOP
2
Press a/b/c/d to select d, and then press
ENTER.
• Slide show starts.
• Operate slide show with the operation panel
appears on the screen.
• To turn off the operation panel, press CARD
on the remote control.
NOTE
• See page 42 for operation panel function.
• You can not rotate the image during slide show. Stop slide
show to rotate the image.
Video
File 2 File 3
File 5 File 6
File 8 File 9
0001/0045 ORDER:NORMAL REPEAT:OFF
PREV. NEXT