Recording Digital Programs With A D-Vhs Deck (I.link) - Sharp Aquos LC 26GD4U Operation Manual

Using external equipment
Recording digital programs with a D-VHS
deck (i.LINK)
• Before commencing this procedure, the steps in
"i.LINK Setup" on page 58 need to be completed
beforehand.
• Please also refer to the operation manual of the D-
VHS deck to be used with this TV.
1
Select a digital program to be recorded.
2
Press i.LINK to display the i.LINK control
panel.
1
0 0 : 0 0 : 0 0
Stop D-VHS
3
Press a/b/c/d to select E, and then press
ENTER.
• Recording starts.
• Select E and press ENTER to stop recording.
NOTE
• Input mode cannot be switched to i.LINK during recording.
• Some D-VHS decks may not be able to be operated using
the TV's i.LINK control panel.
• When a D-VHS deck connected to the TV is under timer
recording, the deck cannot be operated using the TV's
control panel.
• When the TV's control panel is used to record a program,
what is recorded with the D-VHS deck are the pictures
and sound of the digital program that the TV is receiving.
• To record the picture and sound of a digital program which
the TV is receiving, use D-VHS tape. VHS or S-VHS tape
will not record.
• The i.LINK control panel cannot be used during timer
recording.
Model Input
PWR
PLAY
61