[appl]
admin_password=111111
Bluetooth_parameters=
remote_forward_code=
remote_forward_deactive_code=
power_priority=3
asset_id=
time_format=0
speed_dial_1_first_name=
speed_dial_1_last_name=
speed_dial_1_uri=
speed_dial_2_first_name=
speed_dial_2_last_name=
speed_dial_2_uri=
All Rights Reserved © Alcatel-Lucent 2010
Enter the set password in SIP mode
Enter the forwarding activation code.
Enter the forwarding deactivation code. This
code must be identical with the forward
cancellation prefix defined in the PCX.
–
1 for critical
–
2 for hight
–
3 for low
asset_id by default is MAC address, it's used in
LLDP inventory management
Enter the time format for set display:
–
0 for 24 hours format
–
1 for AM and PM format
Enter the first name to display when key 3 is
activated
Enter the last name to display when key 3 is
activated
Enter the URI or the call number locally dialed
by the set when key 3 is activated
Enter the first name to display when key 4 is
activated
Enter the last name to display when key 4 is
activated
Enter the URI or the call number locally dialed
by the set when key 4 is activated
Page 20