Subscribe to Our Youtube Channel
Related Manuals for Marshall Amplification V-R241-4K
Summary of Contents for Marshall Amplification V-R241-4K
- Page 1 B r o a d c a s t A / V D i v i s i o n V-R241-4K 12G-SDI / HDMI Multi Format LCD Monitor User Manual...
-
Page 2: Table Of Contents
V-R241-4K Manual Table of Contents 1. Introduction Welcome to the Marshall V-R241-4K multi-format monitor. This feature-rich design supports 1. Introduction video formats up to 4K/UHD, wide color gamut, HDR calibration and much more. Video inputs 2. Features include 12G SDI, quad 3G SDI and HDMI 2.0. Special features include quad display mode, IMD text and tally, Timcode Display, 16-channel audio bars, waveform monitor, vectorscope and 3. -
Page 3: Front Panel Features
V-R241-4K Manual 4. Rear Panel Features 3. Front Panel Features 1. Power Button 1. Two 12G-SDI inputs / outputs Video source when not in menu mode Ethernet port for remote operation. Press and hold Input button for 5 seconds to 8. -
Page 4: Compatible Input Formats
5. Compatible Input Formats 6. Main Menu and Navigation The following video standards are supported by the V-R241-4K monitor: The menu system provides many choices to customize the monitor operation. Most menus consist of just three levels to set up the options, but some require greater depth for the variety... -
Page 5: Marker Config
V-R241-4K Manual Selecting a Video Source 7. Marker Config Press one of the input direct access buttons (just to the right of the Power button) or….. The Marker Config item allows selection of on-screen markers for Aspect Ratio, Center Mark as Press the INPUT button and then use UP/DOWN arrows or turn the Adjust Knob to highlight well as “safe action”... -
Page 6: Video Config
V-R241-4K Manual 8. Video Config HV Delay (SDI Only) The video image can be shifted on the display horizontally (to the right), vertically (shifted The Video Config setting provides control of a wide range of display functions and picture down) or both (sometimes called “pulse cross” mode). This allows inspection of the Horizontal adjustments. -
Page 7: Color Config
V-R241-4K Manual 9. Color Config Color Space (Color Gamut) Color Space presets are provided to allow best reproduction of material acquired or color corrected for a particular color gamut. Choices are: Native / BT 709 (REC 709) / SMPTE-C / EBU / NTSC / D-Cinema. -
Page 8: On-Screen Features
Choose from Channel 1 through Channel 16 or select OFF (silence). Channels may be monitors individually or in pairs, 1&2, 3&4, etc. The V-R241-4K monitor comes with several powerful on-screen display (OSD) features. NOTE: Short-cut. Program one of the User Buttons (F1 – F5) to “Audio Channel” for quick selection of audio channels without opening the menu system. -
Page 9: Waveform Config
13. Caption Config Enable The V-R241-4K monitor can decode and display a variety of Closed Captioning that may be Selects Waveform Monitor & Vectorscope display. embedded in the video signal from the selected SDI input. NOTE: Closed captioning is never embedded in HDMI signals. -
Page 10: Time Code Config
V-R241-4K Manual 14. Time Code Config 15. IMD Config SDI video may carry up to two embedded copies IMD stands for “In Monitor Display” and consists of of Timecode. These correspond to Vertical Interval large font text which can represent a source name, Timecode (VITC) plus a digital representation of a person’s name, or other arbitrary text. -
Page 11: Osd
V-R241-4K Manual 16. OSD 17. System Config This function controls the appearance of the OSD (On GPI Control & GPI# Screen Display) menus. GPI (General Purpose Interface) is the simplest type of remote interface requiring only a button or switch... -
Page 12: Communication Config
V-R241-4K Manual Factory Default 18. Communication Config Sets the monitor menus back to Factory original settings. User settings will be erased. The Communication Config section provides settings for Choices: ON reset to factory settings, OFF do not reset. three control interfaces: NOTE: Pressing the Adjust Knob or Input button initiates reset. -
Page 13: Control Config
V-R241-4K Manual 422 Baud Rate 19. Control Config Select the Baud rate (data rate) for the RS-422 serial port (Compatible with RS-485). Front LED Choices are: 2400, 4800, 9600, 19200, 38400, 57600, 115200 Default = 38400 This function turns the lights in the front panel buttons 422 Protocol OFF. -
Page 14: Service Config
V-R241-4K Manual Patterns 20. Service Config This function controls the internal test pattern generator. All patterns are full screen. Choices are: OFF: Normal monitor operation. Auto Run: Each color test pattern will be displayed for approximately 5 seconds. White, Black, Red, Green, Blue, Yellow, Cyan, Magenta: Full screen of a solid 100% saturated color. -
Page 15: Specifications
V-R241-4K Manual 21. Specifications 22. dimensions Panel RS422 Interface Screen Size 23.8” Display Area 527.04 x 296.46 mm 20.7”H x 11.67”V Pixel Arrangement 3840 x 2160 Brightness 350 cd/m Contrast Ratio 1000 : 1 Connector GPI Interface 12G-SDI Input #1 & 2... -
Page 16: Warranty
Warranty Marshall Electronics warranties to the first consumer that this device will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of two years from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty.
Need help?
Do you have a question about the V-R241-4K and is the answer not in the manual?
Questions and answers