Table of Contents
Advertisement
Installation Procedure
Do not install the air conditioner in following places.
• Place where there is mineral oil or arsenic acid. Resin
parts flame and the accessories may drop or water may
leak. The capacity of the heat exchanger may reduce or
the air conditioner may be out of order.
• The place where corrosive gas such as sulphuric acid gas
generates from the vent pipe or air outlet.
• The copper pipe or connection pipe may corrode and
refrigerant may leak.
• The place where there is a machine that generates
electromagnetic waves. The air conditioner may not
operate normally due to control system.
• The place where there is a danger of existing
combustible gas, carbon fibre or flammable dust.
• The place where thinner or gasoline is handled. Gas may
leak and it may cause fire.
Step 1 Checking and preparing
accessories
The following accessories are supplied with the indoor
unit.
Insulation pipe (3 ea)
Drain hose (1 ea)
Clamp (1 ea)
Installation template (1 ea)
360_AC_Indoor_IM_AU_ENG_EN.indb 5
Step 2 Choosing the installation
location
Installation location requirements
• There must be no obstacles near the air inlet and outlet.
• Install the indoor unit on a ceiling that can support its
• Maintain sufficient clearance around the indoor unit.
• Before installing the indoor unit, be sure to check
• The indoor unit must be installed such that it is beyond
Cable-tie (6 ea)
Installation manual (1 ea)
User manual (1 ea)
Dimension gauge (1 ea)
weight.
whether the chosen location is well-drained.
public access and is not touchable by users.
5
English
2016-05-13 오후 5:01:33
Hide quick links:
Advertisement
Table of Contents
