Recording From An External Source - Sharp DV-RW340U Operation Manual

Settings for an external source (cont'd)

Recording from an external source

Video VR
DVD-R DVD-R
DVD-RW DVD-RW DVD-RW DVD-RW
Before recording from an external source, see the instructions for the connection on page 37.
1. Turn the TV and the unit on, and be sure to select the input
of the TV to which the unit is connected.
2. When you want to record to the disc: Press:
Press OPEN/CLOSE A button to open the disc tray, then
place the disc to record properly.
This operation may take a while to be recognized.
3. Press OPEN/CLOSE A button to close the disc tray.
When you want to record to a videotape: Press:
Insert the videotape with a record tab into the cassette
compartment.
4. Select the input of the unit which the external equipment is
connected. (L2 or L1)
•To use the input jacks on the back of this unit, select "L1" position by
pressing [0],[0],[1] on the remote control or the CH K / L buttons.
•To use the input jacks on the front of this unit, select "L2" position
by pressing [0],[0],[2] on the remote control or the CH K / L but-
tons.
5. Select a recording speed using REC MODE/REC SPEED but-
ton. Refer to "Recording speed" on page 27 for DVD or page 94 for
VCR.
XP SP
SEP SLP
DVD mode
6. Press REC/OTR button on the unit to start recording.
7. Press PLAY button on the external source to record from.
8. For disc:
Press STOP C button on the unit to stop recording.
This operation may take a while to be completed.
For videotape:
Press STOP/EJECT C A button on the unit to stop record-
ing.
38
Recording
VCR VCR
DVD
LP
SP SLP
EP
VCR mode
5
REC MODE
POWER
REC SPEED
1
.@/:
1
GHI
4
PQRS
7
SPACE
DISPLAY
VCR
REC/OTR SETUP
6
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
CM SKIP
MODE
OPEN/CLOSE
AUDIO
2
ABC DEF
2 3 3
CH
JKL MNO
5 6
TUV WXYZ VIDEO/TV
8 9
4
SLOW
0
VCR DVD PAUSE
PLAY
8
STOP
TIMER PROG.
ENTER
RETURN
SKIP SKIP