Setup/Disc/Cd Menu - Sharp DV-RW340U Operation Manual

Guide to Displays on screen menu
This unit uses the following on screen menu for most operations: SETUP/DISC/CD menu,
Title list, and DISPLAY menu.They allow you to change the playing status of disc during play.
The DISPLAY menu also gives you information on the status of the disc or a videotape.

SETUP/DISC/CD menu

Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by pressing { / B
buttons.Then, press ENTER button to display each menu.
These menus provide entries to all main functions of the unit.
"SETUP" is available only in the
Stop mode.
Setup Menu
Setup
1 2
4 5
Playback Setting
1. Playback:
To set up the unit to play discs as
you prefer.
2. Recording:
To set up the unit to record to
discs or videotapes as you prefer.
3. Display:
To set up the OSD screen and the
front display of the unit as you
prefer.
4. Select Video:
To choose a line input to record
to DVD discs from other video
equipment.
5. Clock:
To set up the clock of the unit as
you need.
6. Channel:
To adjust the channel setting of
the unit as you prefer.
Before you start
Functional overview (cont'd)
"DISC" is available only when a DVD-RW/R disc is
inserted into the unit.
When a DVD-Video disc (commercially available),
new DVD-R disc, or the finalized DVD-R disc is
inserted into the unit, you cannot select "DISC".
Disc Setting
Disc
Edit
Format
3
Finalize
Disc Protect OFF ON
1 2 3 4
6
1. Edit:
Turns on a title list, (When a disc with
VR mode is inserted, 'Original' or
'PlayList' is available.), which shows
the recorded titles on the disc.
2. Format (DVD-RW only):
Allows you to erase all of the
recorded content on the disc.
The disc will be completely blank.
• Erased content cannot be called
back. Please make sure before you
format a disc.
• A DVD-RW disc formatted with
this unit cannot be used in other
DVD recorders without any
recording using this unit.
• If you want to use a disc only for-
matted with this unit on another
DVD recorder, you have to re-for-
mat the disc on that recorder.
3. Finalize:
Allows you to finalize a disc contain-
ing recorded titles.
4. Disc Protect (VR mode only) :
Allows you to protect a disc from
accidental editing or recording.
"CD" is available only when an
Audio CD disc or a CD-RW/R
disc with MP3 files is inserted
into the unit.
CD Playback Mode
CD Playback Mode
Random Play
Program Play
1 2
1. Random Play:
To activate the random playback
feature.
2. Program Play(Audio CD
only):
To activate the programmed play-
back feature.
11