Sharp DV-RW340U Operation Manual page 98

Symptom
There is no picture.
Picture noise appears.
There is no sound.
Sound is noisy.
The disc does not play.
D Playback image freezes for a second.
V
D
The disc does not start playback from the
beginning.
The unit starts playing from the disc
automatically.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
The language for the sound track cannot
be changed.
The subtitle language cannot be changed
or turned off.
The angles cannot be changed.
Recording does not stop immediately
after you press STOP C button.
Recording does not start immediately
after you press REC/OTR button.
The disc tray does not open when you
press OPEN/CLOSE A button.
98
Others
Troubleshooting (cont'd)
Remedy
• The Setup Display appears. Press RETURN
off the display.
• Check if the INTERLACE/PROGRESSIVE mode is set correctly
according to your TV. See page 14.
• The disc is dirty or flawed.
• If the picture output signal from the unit passes through your VCR
to get to your TV, or if you are connected to a combination
TV/VIDEO player, the copy-protection signal applied to some DVD
programs could affect picture quality. If you still experience this
problem even when you connect the unit directly to your TV, try
connecting the unit to your TV's S-VIDEO input.
• If the audio signal does not come through the DIGITAL OUT
(COAXIAL) jack, check the Audio Setup settings (pages 90-91).
• The disc is dirty or flawed.
• The disc is dirty or flawed.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play certain discs (such as a CD-ROM) (page
43).
• The region code on the DVD VIDEO does not match the unit
(page 43).
• Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on for about two hours until the moisture
evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot
play the disc if it was not finalized (page 41).
• During the playback of two layered disc, picture may freeze for
a moment when the 1st layer switches to the 2nd layer. This is
not a malfunction.
• Resume play was activated (page 48). Press STOP C button
twice.
• You have inserted a disc whose Title menu or DVD menu
automatically appears on the TV screen when it is first insert.
• The DVD VIDEO features an auto playback function.
• Depending on the disc, you may not be able to do some of the
operations above. See the instruction manual supplied with the disc.
• Multilingual tracks are not recorded on the DVD VIDEO,
DVD-R or DVD-RW being played.
• The DVD VIDEO prohibits the changing of the language for the
sound track.
• Try changing the language using the DVD VIDEO's menu.
• Multilingual subtitle are not recorded on the DVD VIDEO.
• The DVD VIDEO prohibits changing of the subtitles.
• Try changing the subtitle using the DVD VIDEO's menu.
• Multi-angles are not recorded on the DVD VIDEO being played.
• You are trying to change the angles when
appear on the TV screen (page 58).
• The DVD VIDEO prohibits changing angles.
• Try changing the angle using the DVD VIDEO's menu.
• It will take a few seconds for the unit to input disc data before
recording can stop.
• An unused DVD-R or DVD-RW was inserted. It takes a while
for the unit to automatically format a DVD-RW.
• It may take a few seconds for the disc tray to open after you
have recorded or edited a disc.
• This is because the unit is adding disc data to the disc.
button to turn
icon does not