Table of Contents
Advertisement
Warranty
You receive a 2-year warranty on all D+H articles from the documented
date of handover until max. 3 years after the delivery date, provided that
the installation/commissioning was carried out by an authorised D+H
service and sales partner.
When connecting D+H components to external system or mixing D+H
products with parts from other manufacturers.
Inspection
Regular visual inspection between maintenance by the operator or a
trained person.
Immediately correct any defects.
Displays:
• Green LEDs in the buttons must illuminate.
• Yellow LEDs in the buttons and the control panel are not allowed to
illuminate or flash (fault).
• If the green LEDs do not illuminate or if the yellow LEDs illuminate or
flash, contact After Sales service.
Visual inspection:
• Check all devices and cable connections for external damage and
dirt.
• The function of fire detectors, smoke vent buttons, smoke extraction
systems etc. must not be impaired by stored articles or structural
changes.
99.827.31 1.4/06/18
Disposal
Electrical devices, accessories, batteries and packaging should be recy-
cled in an environmentally responsible manner. Do not throw electrical
devices and batteries into the household waste!
Only for EU countries:
In accordance with European Directive 2012/19/EU pertaining to waste
electrical and electronic equipment and its implementation in national
law, usable electrical devices must be collected separately and submit-
ted for environmentally responsible recycling.
Maintenance and cleaning
Carried out once a year by a specialist company authorised by the
device manufacturer.
Carry out cleaning and maintenance work only when the system is
de-energised.
Replace the inspection plate, maintain the operational book.
The inspection and maintenance must take place in accordance with
the D+H maintenance instructions.
The respective current D+H maintenance instructions are authoritative.
An authorised D+H specialist company receives this automatically and
has been given special training by D+H in carrying out this mainte-
nance.
The following tests must be carried out during maintenance:
• External expert assessment / inspection of the system components
• Checking all relevant voltage supply units
• Function test of the connected system components
• Logging the proper completion of maintenance and
• Labelling in accordance with requirements
Only original D+H spare parts may be used. Repairs are carried out by
D+H exclusively.
Wipe off dirt with a dry, soft cloth.
Do not use any detergents or solvents.
English
CPS-M1
35/36
Advertisement
Table of Contents
