Sharp TINSE0568AWZZ Operation Manual page 85

ERROR MES- MEANING
SAGES
" You removed a MiniDisc whilst record-
LOCKED
ing or editing.
(Turn off the power before removing the
MiniDisc.)
" The number of a disc, group, or track
NAME FULL
(N-FULL) name exceeds 40.
(Shorten the name.)
" A disc has not been loaded.
NO DISC
(NoDISC)
" Poor connection of the digital cable.
NO SIGNAL
(noSIG.)
" No output signal comes out from the
connected unit.
(Use the AC power for the connected unit.)
" The input signal has improper sampling
frequency.
" There is no track to be played.
NO TRACK
(NoTRACK)
" You tried to record on a playback-only
PLAY MD
(PLAYmd) disc.
" AC adaptor other than specified.
POWER?
" Abnormal voltage detected.
" The write protection tab of a MiniDisc is
PROTECTED
set to the protected position.
" Since a track number is currently being
SORRY
(Sorry) located or updated, the unit cannot ac-
cept your command.
(Wait a while and try the operation again.)
IM-DR580H(E) TINSE0568AWZZ
ERROR MES- MEANING
SAGES
" The temperature is too high.
TEMP OVER
(TEMP!)
(Turn off the power, and wait a while.)
" There is an error in the recorded signal.
TOC FORM
(**)
(Erase all of the tracks, and then record
again.)
" There is no space left for recording
TOC FULL
(T-FULL) character information (track names,
disc names, etc.).
" The track has been protected from be-
Tr. Protect
(Tr. PRO- ing erased.
TECT)
(Edit the track with the device on which it
was recorded.)
" A disc which contains data other than
? DISC
music was played.
(A disc which contains non-music data
cannot be played.)
" The group recording or the GROUP
? Gr Form
RESERVE function cannot be per-
formed.
(Erase the disc name and retry the same
operation.)
" A number or symbol appears in (*) position.
" Messages shown in the brackets are shown on the
remote control.
03/10/15 IM-DR580H(E)9.fm
IM-DR580H
9
85