Changing Default Settings - Sharp TINSE0568AWZZ Operation Manual

Changing Default Settings (continued)
IM-DR580H
! Beep sound
You can eliminate the confirmation sound that beeps
when you press a button.
! Auto play
You can make the unit not play automatically when you
insert a playback-only MiniDisc or an accidental erasure
protected MiniDisc.
! Auto power save
When the unit is used in a place exposed to much vibra-
tion, sound skipping can be decreased by cancelling the
auto power save function. (Battery will drain faster.)
What is auto power save function?
During playback, maximum 40 seconds (in stereo) of
musical information is stored. Auto power save function
automatically adjusts the storage time between 5 and 40
seconds to reduce the power consumption. If this func-
tion is cancelled, the storage time cannot be adjusted.
" When the multi-link station is powered by the AC
adaptor, the storage time will be 40 seconds regard-
less of the settings.
" The storage time varies depending on the recording
mode.
! Digital recording level
"AUTO SAVE"
The digital recording level you set will be kept even after
cancelling recording.
"NOT SAVE"
Every time you cancel recording, the level will return to
"D.L. 0 dB".
72
IM-DR580H(E) TINSE0568AWZZ
! Group playback mode
Tracks are played in the recorded order regardless of the
group.
! Line monitor/Optical monitor
You can switch the monitor sound on and off. When PC
and the multi-link station are connected through input
and output sockets, select "OFF" to avoid howling or
sound deterioration.
Note:
Howling or sound deterioration may not occur on some
PCs.
! Backlight on the remote control
"NORMAL"
Display Always displayed
Backlight Lit for approx. 10 seconds dur-
ing operation
"ALL TIME"
Display Always displayed
Backlight Always lit.
"AUTO OFF"
Display Displayed for approx. 10 sec-
onds during operation
Backlight Lit for approx. 10 seconds dur-
ing operation
"REC" indicator on the main unit: Off
! Auto character
If kanji and alphabets are used for a disc, group or track
name, set the auto character function to "OFF" to show
both. When it is "ON", alphabets do not appear.
03/10/15 IM-DR580H(E)7.fm