Sharp TINSE0568AWZZ Operation Manual page 35

<When recording from a microphone>
1
Press the REC button.
2
Press the MENU button.
The unit enters the menu select
mode.
3
Select "MARK" by pressing
the or button and press
the ENTER/-USB ( ) button.
4
Select the desired interval by
pressing the or button
and press the ENTER/-USB
( ) button.
OFF No track numbers are created auto-
matically.
TIME 10min A new track number is created ev-
ery 10 minutes.
TIME 5min A new track number is created ev-
ery 5 minutes.
TIME 3min A new track number is created ev-
ery 3 minutes.
Notes:
" The interval between marks may vary slightly com-
pared with the actual recording time.
" Whilst recording, a change in the numbering setting is
applied immediately.
IM-DR580H(E) TINSE0568AWZZ
Auto mark indicator on the remote control:
You can check the setting for auto track numbering.
Auto mark indicator
ON: Set
OFF: Disabled
2. In digital recording, tracks will be numbered as fol-
lows:
When recording from a CD or a MiniDisc using the digital
connection, track numbers will be created at the same
points as on the CD or MiniDisc (synchro marker func-
tion).
First track Second track Third track
Playback
side Track A Track B Track C
First track Second track Third track
Recording
side Track A Track B Track C
Notes:
" Track numbers may not be created in proper places,
depending on the source to be recorded from, such as
signals with noise.
" When recording, if a programmed playback is per-
formed by the source or playback is performed by
selecting tracks manually, the MiniDisc track numbers
may not be the same as on the source.
" In digital recording, track numbers may not be created
depending on the connected stereo system.
03/10/15 IM-DR580H(E)4.fm
IM-DR580H
3
35