• It does not require forced ventilation, thus avoiding noise emission. * We noted that the light emitted by the Optilight LD Max is completely contained within the absorption interval of the photo starter, therefore it’s 100% used, whereas the conventional equipment running on halogen lamps has non-used wave-length regions.
List of pieces and circuit scheme Gnatus Company declares that the supply of the circuit scheme, list of pieces or any other information that propitiate technical attendance for the user, can be request if there is an agreement between the...
TECHNICAL SPECIFICATIONS • Power supply • Activation • Electric shock protection Ve: 90V~-240V~ Through the hand-piece button. type: Vs: 5,0V. 1,2 A. Class two equipment. • Light conductor Made out of special polymer, ro- • Frequency • Water leak protection tational, removable and reuse 50/60Hz.
Page 6
- Verify the general key of the equipment in the position “0”. OBS: These information also make part of the Manual of Installation and Maintenance of the equipment that can be found with the authorized Gnatus technician. T ransport and storage conditions The equipment must be transported and stored with the following observations: - Carefully, should not suffer drop and neither receive impact.
TECHNICAL SPECIFICATIONS Packing symbols Packing to be stored with a maximum Packing to be transported and / or stored stack of 13 units. with the harrows up. Packing to be transported and / or stored Packing to be transported and / or avoiding humidity, rains and wet floor.
OPERATION • For your safety the Optilight LD Max is equipped with an automatic bi-voltage power supply of 90V~-240V~ - 50/60Hz. • Plug in the power supply (01) to the electrical outlet. • Select application time, press time selection button (10), which values are: 10s (standard mode), 20s, 60s, 80s and 90s.
- The conductor can’t be immersed in solvents or substances that contain acetone in its composition. - Avoid the light conductor to terminal to touch the resin to be polymerized. - When using the Optilight LD Max check if the light conductor output doesn’t have residues that might obstruct the light beam.
The most important aspect related to equipment care is that concerning spare parts. To guarantee the life span of your equipment, use only original Gnatus spare parts. They are sure to follow the technical specifications and standards required by Gnatus.
Need help?
Do you have a question about the Optilight LD Max and is the answer not in the manual?
Questions and answers