INDEX PRESENTATION OF MANUAL ................02 DESCRIPTION OF THE EQUIPMENT ...............04 MODULES, ACCESSORIES, OPTIONS AND MATERIALS OF CONSUMPTION ..06 TECHNICAL SPECIFICATIONS ...............07 - Technical characteristics .................07 - Dimension ....................08 - Symbologies of packaging ................09 - Symbologies of product ..................09 - Standards applied ..................09 - Contents of the accessible and inaccessible markings .........10 INSTALLATION OF EQUIPMENT ..............10 OPERATION OF EQUIPMENT .................12...
DESCRIPTION OF THE EQUIPMENT Dear Customer Congratulations. You have made a good choice when you decided to buy a GNATUS QUALITY product comparable to the best products available in the World. This manual is a general presentation of your product and it will give you important details to help you to solve possible problems.
Page 5
The Biovac sec can be connected to water units, Vacuum Bomb II Kit and Vacuum Bomb Made in steel structure with high corrosion resistance, with rounded corners and easy cleaning, it allows the consistently day-by-day operation for many years.
TECHNICAL SPECIFICATIONS General Model Biovac Sec Classification of equipment as per standard IEC 60601-1 Protection against Electric Shock - Type BF and Class II Equipment (IEC 60601-1) Protection against dangerous ingress of water IPX 0 Mode of Operation Continuous operation...
TECHNICAL SPECIFICATIONS Packing symbols Maximum stacking: It determines the maximum Packing to be transported and / or stored avoiding humidity, quantity of boxes which can be stacked during transportation rains and wet floor. and storage “as per packaging”. The packing must be stored and Packing to be transported and / or transported away from direct stored with the harrows up.
Manual of Installation and Maintenance in being able to not of the authorized technician Gnatus. - This equipment shall only be able to be unpacked and installed by a Gnatus authorized technician, under penalty of losing the warranty, as only (s)he has the information, suitable tools and training required to execute this task.
Page 11
INSTALLATION OF EQUIPMENT Below are two options for installation of the Biovac Sec in the office. • Option 1: Vacuum bomb localized besides connection box. • Option 2: Vacuum bomb localized inside the closet. For the vacuum bomb installation, check these following points: - Sewer –...
If your Biovac Sec is installed inside your office, put a 3/4“ hose (not included) in damper located at the lower Biovac Sec and let the other extremity outside the office. This procedure decreases the pump noise. Note: This procedure is not required for Biovac Sec operation.
Precautions and warnings “during the installation” of quipment - The equipment should only be installed by Gnatus authorized technical assistance or technicians. - Check that the socket in which the device will be connected has a ground connection.
- The equipment should only be operated by duly enabled and trained technicians (Dental Surgeons, Capacitated Professionals) - If any maintenance should be required, only use services of the Gnatus Authorized Technical Assistance. - The equipment has been manufactured to handle both continuous.
NOTE: The registration at the Ministry of Health of the “BactSpray” is executed separately from the product described in this manual, as the “BactSpray” is not manufactured by Gnatus. WARNING: - In order to prevent risks and damages to equipment, make sure that the liquid does not enter into the unit.
(see solution preparation in the previous item). To clean the filter, follow the procedure below: - After the solution suction through the Suctorian, remove the Biovac Sec covers that access to the conduit head (1). - Release the cable clip (2).
Page 17
- Fit the filter and place the tube in the tank surrounding the electrodes (10). Note: Do not miss this tube, because it avoids the foam electrodes. - Making the inverse procedure, mount the reservoir and cover the Biovac Sec.
Preventive Maintenance The equipment should be calibrated routinely, as per the legislation in force in the country. But never with a period exceeding 3 years. In order to protect your equipment, seek Gnatus technical assistance for periodic revisions of preventive maintenance.
The most important aspect related to equipment care is that concerning spare parts. To guarantee the life span of your equipment, use only original Gnatus spare parts. They are sure to follow the technical specifications and standards required by Gnatus.
Need help?
Do you have a question about the Biovac Sec and is the answer not in the manual?
Questions and answers