Reconnecting Your Wi-Fi Network - Honeywell Lutron VisionPRO 8000 User Manual

Reconnecting your Wi-Fi network

1 Touch MENU. Select Wi-Fi Setup.
2 Find the name of the network you want to
use by pressing the arrow buttons to scroll
up/down or left/right. Press the Wi-Fi network
name, then press Select. The thermostat
might display a password page.
3 Enter the password. (See step 1.6 on
page 6 for assistance with entering a
password.) Press Done when complete.
4 The thermostat displays "Connecting Please
Wait" then a "Connection Successful" screen.
5 Touch Done.
• If your thermostat is registered, you will
see your signal strength and other status
information. Touch Done.
• If the screen displays "Register at
Honeywell.com/TCC," go to Honeywell.com/TCC and follow the instructions
there, or see page 8.
DoaIol Inrol Madorl
Installer Options
38
Wi-Fi Setup
M35352
M35360
Connection
Successful
M35351
33-00066EFS—03