Setting System Mode - Honeywell Lutron VisionPRO 8000 User Manual

Setting system mode

1 Touch SYSTEM to display system
settings.
2 Touch desired option:
Heat: Controls only the heating
system.
Cool: Controls only the cooling
system.
Off: Heating/cooling systems are off.
Auto: Selects heating or cooling
depending on the indoor temperature.
Em Heat (heat pumps with aux.
heat): Controls auxiliary/emergency
heat. Compressor is locked out.
3 Touch Done to save and exit.
Heat
NOTE: The Auto and Em
Heat system settings may not
appear, depending on how your
thermostat was installed.
14
MCR34098
Cool Auto
Off
MCR34099
33-00066EFS—03