Error Codes; Humidity Setting; Continuous Operation; Setting The Timer - Ivation IVALDH95PWWP User Manual

Error Codes

The following codes may appear on the LED display:
AS - Humidity Sensor Error
ES - Temperature Sensor Error
P2 - Water Collection Reservoir is full
EC - Unit Malfunction
E3 - Unit Malfunction
EB - Water Collection Reservoir Error

Humidity Setting

• The humidity level can be set between 35% RH and 85% RH in 5% increments. Press the left
< and right > buttons to lower the % number for drier air or to raise the % number for moister air. You
will see the numbers in the LCD display.
• Once the humidity level is set, the LCD display will show the actual room humidity level (+5% accuracy).
• The dehumidifier will cycle on and off in order to maintain the selected humidity level.

Continuous Operation

• To run the dehumidifier continuously regardless of the relative humidity in the room, press the
Cont. button.
• The "Cont." indicator light will illuminate.
• The unit will run continuously until the water reservoir is full.
• To stop continuous operation, press the Cont. button again and set a relative humidity level.

Setting the Timer

You can program the dehumidifier to start or stop automatically at a prescribed time between 0.0 and 24
hours. Press the timer button to begin the auto start or auto stop function.
• Setting Auto Start and Stop Times
1. Turn the unit off.
Error Codes
Unplug the unit and plug it back in.
Unplug the unit and plug it back in.
Empty the reservoir.
Please make sure the envoirnment temperature is
between 41°F (5°C) and 96°F (35°C).
Unplug the unit and plug it back in.
Reservoir is removed or not positioned correctly.