Filling The Bean Container; Hot Water - Espressione 8212S Instruction Manual

III. FILLING THE BEAN CONTAINER
When is flashing, the appliance needs to be filled with coffee bean:
1. Remove the bean container lid
2. Slowly pour in the coffee beans.
3. Install back the container lid.
IMPORTANT: Fill the coffee bean container with coffee beans only. Grounded coffee, instant
coffee, caramelized coffee and any other objects may damage the machine
IV. Preparing Frothy Milk for Coffee
As the temperature of steam is higher than the temperature of espresso, So
espresso should be prepared before making frothy milk; otherwise the
espresso might be burnt.
1. Prepare the espresso coffee with larger cup.
2. Turn the steam nozzle toward to the Drip tray.
3. Press the steam button. Steam indicator light will flash. Then the
appliance is heating up and draining the residual water into the Drip
Tray or another container.
4. After the steam indicator light stop flashing and stay on, place a
container with milk under the steam nozzle and immerse the steam
nozzle about 2 inches deep into the container.
5. Press the steam button again.
6. Swivel the container while the hot steam comes out.
7. When the milk is hot enough with froth appeared.
Then press again the steam button to stop the steam.
8. Use a wet towel to clean the nozzle cover and metal
tube. (Refer to "DAILY CLEANING OF THE APPLIANCE")
9. Pour the hot frothy milk into the espresso.
10. Now you can enjoy your coffee.
V. HOT WATER
The appliance can dispense hot water by simply pressing the hot water button. The hot water
button and the illumination will lights up indicates that the appliance is heating up the water. When
the hot water button and the illumination turn off, the water is ready to serve.
VI. DAILY CLEANING OF THE APPLIANCE
Timely cleaning and maintenance of the appliance is very important in prolonging the life of the
appliance.