Espressione 8212S Instruction Manual page 8

6. Unwind and straighten the power cord and
insert the plug into the socket located on
the back of the machine. Insert the other
end of the power cord into a wall socket
with suitable power voltage.
C. Daily Operation
I. MAKING YOUR COFFEE
1. Switch on the appliance by pressing the power on/off button.
2. The control panel will flash, when it becomes solid then the appliance is in standby condtion.
3. Place a cup under the coffee spout and adjust the height of the spout the fit the cup. Depending
on the size of the cup (too tall or too wide) you can remove the drip tray or adjust the position
of the drip tray as below:
4. Depending on the taste of coffee you would like to have, press strong espresso button
mild espresso button
5. The espresso button being pressed will light on and the illumination will lights up indicates that
the appliance is preparing the cup of coffee.
6. When the appliance is back to standby condition, the coffee is ready to serve.
Note: Press the hot water button (see page 9 section IV) to clean inside of the coffee maker
before first use.
.
or