Manual Rinsing - Espressione 8212S Instruction Manual

5. In standby condition, press and hold
sound will be heard with
6. Press strong espresso button
back to the standby condition, press
7. will be flashing indicates that the appliance is undergoing the self-cleaning process.
(Caution: Keep skin/body away from the hot water.)
8. When all the water in the water tank is being dispensed out,
will be flashing. Remove all the remaining solution in the water tank and fill the tank with
normal tap water until the max position. When water is filled into the water tank,
goes off. Then the appliance will continue the self-cleaning process.
9. When the self-cleaning process is completed, the appliance will switch off automatically.
II. EMPTY SYSTEM FUNCTION
The empty system function is recommended to be used before long period of non-use, frost
protection and before talking to repair agent.
In standby condition, press and hold the
1.
seconds.
will then be flashing.
2.
Remove the water tank from the appliance.
3.
system is under process. You can press
the standby condition.
When the empty system function is completed, the appliance will switch off automatically
4.
Important: After perform EMPTY SYSYEM FUNCTION; press the hot water button until water can come out
from spout when the coffee maker is reused again.
III. MANUAL RINSING
You can perform a manual rinsing cycle to clean the coffee nozzle after use. It is also suggested to
perform a manual rinsing if the appliance has not been used for a long period of time.
1. In standby condition, press and hold the
2. The hot water button
goes off. The coffee nozzle will then dispense a small amount of water which is used for the
rinising.
Danger: Water comes out of the coffee nozzle is hot and is collected in the drip tray underneath.
Avoid contact with splashes of water.
and strong espresso button
and strong espresso button
to confirm undergoing the self-cleaning process. To resume
.
and mild espresso button
before removing the water tank to resume back to
and hot water button
, strong espresso button
will be flashing.
and strong espresso button
will light up stably indicates that the empty
and mild espresso button
for 5 seconds. A beep
will
together for 5
together.
will then