Submenu Cleaning; Submenu Error List; Submenu Portioner; Submenu Milk - WMF presto Service Manual

WMF presto Service Manual
3.5

Submenu cleaning

3.6

Submenu error list

Delete individual errors: tap on the line
Delete complete error memory: tap
3.7

Submenu portioner

Example right grinder
Only the maximum dosage amount can be set for the
powder portioner (default 150). A detection of the idling
current is not possible.
3.8

Submenu milk

3.9

Submenu access control

The settings correspond to the default of the previous
standard setting. However, they can now be changed /
assigned independently of each other.
8
Number of cleanings performed and to be performed
Number of mixer rinsings performed
Number of milk system cleanings performed
Time until request for cleaning/forced cleaning
Hardware for foamer rinsing available?
Delay in foamer rinsing after last beverage dispensing
Switch warning signal before foamer rinsing on/off
C
Idling current (determined via service routine)
Maximum dosage amount in 1/10 seconds
in future available
empty message via sensor
cooler next to or below
Malfunction and events list see
chapter Error list
WMF presto Service manual edition 11/2011