FactoryService/Customer Menu - WMF presto Service Manual

WMF presto Service Manual
Factory service/customer menu 2

Steam boiler is registered automatically by its intake valve
(See chapter boiler

Steam dispensing valve is automatically detected
(See chapter boiler

Milk is automatically detected
(See chapter boiler

Factory service/customer menu 3

Self-Service mode
2nd level (Yes/No)
On/Off button (direct/through PIN)
Warm rinse pad (active/inactive)
Barista pad (active/inactive)
Cancel Beverage (Yes/No)
Menu pad (immediately/delayed)
Error message (normal/symbol)
Water tank/ Water infeed is automatically detected by
nonexistent intake valve. The external tank can be selected.
By detecting the intake valve the display shows constant
water. Option Aquaflex / technical insert (mobile station)
can be selected.
Drain of drip tray must be correctly adjusted manually.
10
Steam boiler existent
Steam dispensing valve existent
Fresh milk valve (cappuccino valve) existent
water system).
water system).
water system).
Self-Service mode activated?
Water tank / water infeed
Drain drip tray existent? (changes cleaning and descaling )
Default at „No"
depending on configuration
directly
active
active
active
immediately
normal
See chapter Boiler water systems
in the training manual
Part 2 Engineering
Default at „Yes"
No
directly
inactive
inactive
inactive
delayed
symbol
See chapter Boiler water systems
See chapter drip tray
in the training manual
Part 2 Engineering
WMF presto Service manual edition 11/2011