Sharp LL-T1820-B Operation Manual page 30

Installing set-up information and the ICC profile (For Windows)
For WindowsXP
Installing monitor set-up information into WindowsXP,
and setting the monitor's ICC profile as a predeter-
mined value.
This explanation assumes that the CD-ROM drive is
"D drive".
1. Load the accessory CD-ROM into the CD-ROM
drive of the computer.
2. Click on the [Start] button. Choose [Control
Panel].
3. Switch to Classic View.
4. Double click on [Display].
5. Click on [Settings], [Advanced] and [Monitor].
6. Click on [Properties], [Driver] and [Update Driver].
7. When [Hardware Update Wizard] appears, check
[Install from a list or specific location [Advanced]]
and click [Next].
8. Check [Don't search. I will choose the driver to
install.] and click [Next].
9. Click on [Have Disk], confirm that [Copy
manufacturer's files from:] is [D:], and click
[OK].
10. Select the monitor from the list displayed and
click [Next].
11. Confirm that the monitor's name appears on the
screen. If [has not passed Windows Logo
testing...] appears, click [Continue Anyway].
12. Click on [Finish].
13. Click [Close], and close the window.
Installing the ICC profile
Installing the monitor's ICC profile. (If the set-up
information has already been installed, so too has
the profile, and there is no need to install it.)
This explanation assumes that the CD-ROM drive is
"D drive".
1. Load the accessory CD-ROM into the CD-ROM
drive of the computer.
2. Click on the [Start] button. From [Settings],
choose [Control Panel].
3. Double click on [Display].
4. Click on [Settings] and [Advanced].
5. Click on [General] and from [Compatibility] select
[Apply the new display setting without restarting],
then click on [Color Management].
6. Click [Add], and select CD-ROM as the file
location.
7. Choose the color profile that you would like to
install, and click on [Add].
8. Choose the profile and click on [Set As Default].
9. Click [OK], and close the window.
- When using an ICC profile, set [COLOR MODE]
and [WHITE BALANCE] to [STD], and set
[GAMMA], [HUE] and [SATURATION] to [0].
30