Product Description - Sharp LL-T1820-B Operation Manual

1 2 3
1. INPUT button ............................ To switch between the signal's input terminals. (Input terminal 1 ↔ Input
2. MENU button ............................ This button is used to pop-up, select and close the OSD (On Screen
3. SELECT button ........................ This button is used to select menu options when the OSD Menu is dis-
4. buttons .............................. When the OSD Menu is displayed:
5. Power button
6. Power LED ................................ This LED is lit green when in use and orange when in power-saving mode.
7. USB port (downstream: 2 ports)
8. USB port (upstream: 1 port)
9. DVI-I input terminal ................... The computer's digital RGB output terminal or analogue RGB output
10.Security lock anchor ................. By connecting a security lock (purchased separately) to the security lock
11.Power terminal
12.Main power switch
13.Ventilation openings .................. Note: Never block the ventilation openings as this may lead to overheat-

Product description

4 5 6
terminal 2)
Display) Menu.
played.
These buttons are used to increase or decrease the value of a selected
option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness .
terminal can be connected here.
For a digital signal input: It can be connected to a computer with a DVI-
compatible output terminal (DVI-D24 pin or DVI-I29 pin) and which has
SXGA output ability. Depending on the computer to be connected, correct
display may or may not be possible.
anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.
ing inside the monitor and result in malfunction.
10
7 8 9 10 11
13
12