Table of Contents
Advertisement
nEnlarge
• You can align several monitors and integrate them into a
single large screen to display.
• Up to five monitors can be aligned in both the longest and
shortest directions.
• Each monitor displays enlarged views of separated images.
(Example)
Longest direction: 2 monitors
Shortest direction: 2 monitors
Longest direction: 3 monitors
Shortest direction: 2 monitors
Setting procedure
In the ENLARGE menu, set ENLARGE H/V and
ENLARGE-POS H/V. (See page 8.)
1. Set the number of monitors aligned in the longest
direction in ENLARGE H.
2. Set the number of monitors aligned in the shortest
direction in ENLARGE V.
3. Set the section of the separated image to be displayed
on each monitor in ENLARGE-POS H and
ENLARGE-POS V.
ENLARGE H
1
2
1
(1,1)
(2,1)
2
(1,2)
(2,2)
3
(1,3)
(2,3)
4
(1,4)
(2,4)
(1,5)
(2,5)
5
* The numbers in parentheses are the setting values in
(ENLARGE-POS H, ENLARGE-POS V) format.
TIPS
• AV input signals cannot be used for the Enlarge function.
• To connect 6 or more monitors using PC1 signals, a splitter
for the video signal (commercially available) is required.
• When connected in PC2/PC3/PC4, a splitter for the video
signal (commercially available) is required.
• When Enlarge is used, the AUTO INPUT CHANGE function
is disabled.
• To cancel the enlargement, set 1 for ENLARGE H and
ENLARGE V respectively.
3
4
5
(3,1)
(4,1)
(5,1)
(3,2)
(4,2)
(5,2)
(3,3)
(4,3)
(5,3)
(3,4)
(4,4)
(5,4)
(3,5)
(4,5)
(5,5)
nSCHEDULE
You can set the time to switch the monitor on and off.
Set this function with "SCHEDULE" in the OPTION menu. (See
page 7.)
SCHEDULE
XXXX/XX/XX XXX XX:XX:XX
(1)
(2)
No.
POWER
DAY OF THE WEEK
1 9 2 0 x 1 0 8 0
V: 60 Hz
1. Press
or
to select the SCHEDULE number, and
press
.
2. Set the SCHEDULE. (See the description below.)
Press
or
to select items, and press
change the setting.
MENU
3. Press
.
SCHEDULE becomes effective.
(1)
●: SCHEDULE effective
-: SCHEDULE not effective
(2) POWER
ON : Switches the monitor on at the specified time.
OFF : Switches the monitor off at the specified time and puts
the monitor in standby mode.
(3) DAY OF THE WEEK
Specifies the day of the week to execute the SCHEDULE.
ONLY ONCE:
Executes the SCHEDULE once on the specified day.
Specify the day of the week to execute the SCHEDULE.
EVERY WEEK:
Executes the SCHEDULE on the specified day of the week
every week. Specify the day of the week to execute the
SCHEDULE.
Periodic setting such as "Monday through Friday" is also
possible.
EVERY DAY:
Executes the SCHEDULE every day regardless of the day
of the week.
(4) TIME
Specifies the time to execute the SCHEDULE.
Set the time on a 24-hour basis.
(5) INPUT
Specifies the input mode at power-on. When not specifying,
the screen at the previous power-off appears.
Input modes displayed on "PC1/AV1" depend on DVI
SELECT settings.
Input modes displayed on "PC2/AV2" depend on HDMI
SELECT settings.
Input modes displayed on "PC4/AV3" depend on BNC
SELECT settings.
Menu Items
PC3 D-SUB
(3)
(4)
(5)
TIME
INPUT
OK ... [MENU]
H: 66.3 kHz
or
to
9
E
Advertisement
Table of Contents
