1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Monitor
  5. PN-S525P - 52" LCD Flat Panel Display
  6. Operation manual

Sharp PN-S525P - 52" LCD Flat Panel Display Operation Manual

Operation manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PN-S525
LCD MONITOR
OPERATION GUIDE

Advertisement

Table of Contents
loading

Related Manuals for Sharp PN-S525P - 52" LCD Flat Panel Display

Summary of Contents for Sharp PN-S525P - 52" LCD Flat Panel Display

  • Page 1 PN-S525 LCD MONITOR OPERATION GUIDE...

  • Page 2: Table Of Contents

    Contents Basic Operation ...............3 Menu Items ...............5 Displaying the menu screen .........5 Menu item details ............6 Adjustments for PC screen display ......10 Initialization (Reset)/Functional Restriction Setting ... 11 Controlling the Monitor with a PC (RS-232C) ....12 PC connection ............12 Communication conditions .........12 Communication procedure .........12 RS-232C command table ...........16 Controlling the Monitor with a PC (LAN) .....21...

  • Page 3: Basic Operation

    Basic Operation 5. BRIGHT +/- (Backlight adjustment) Pressing displays the BRIGHT menu when the menu screen is not displayed. B R I G H T Press to adjust the brightness. * If you do not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears.

  • Page 4: Basic Operation

    Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it fills the entire screen. AV input An image with a 4:3 aspect ratio is stretched to fill the entire screen.

  • Page 5: Menu Items

    Menu Items Displaying the menu screen nMenu screen display Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu SCREEN PICTURE PC3 D-SUB items. See pages 6 to 8 for details of each menu items. PICTURE AUTO CONTRAST...

  • Page 6: Menu Item Details

    Menu Items Menu item details COLORS Adjusts the color intensity. The menu will differ depending on the input mode. SHARPNESS nSCREEN Adjusts the sharpness of the image. ADVANCED (AV input) AUTO (PC3/PC4) You can adjust more specifically. (See page 10.) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted.
  • Page 7 Menu Items nSETUP nOPTION OSD H-POSITION DATE/TIME SETTING Adjusts the horizontal display position of menu screen. Set the date and time. Press to select the date OSD V-POSITION and time, and press to change the numerical values. Adjusts the vertical display position of menu screen. Set the date in “Year/Month/Day”...
  • Page 8 Menu Items nENLARGE (PC input) TIPS • When WHITE BALANCE is set to THRU, BLACK LEVEL, ENLARGE H CONTRAST, TINT, COLORS and GAMMA cannot be set. Sets the number of screen splits (number of monitors) in the • If COLOR MODE is set to sRGB or VIVID, the following horizontal direction used for the enlargement.
  • Page 9 Menu Items nEnlarge TIPS • You can align several monitors and integrate them into a • AV input signals cannot be used for the Enlarge function. single large screen to display. • To connect 6 or more monitors using PC1 signals, a splitter •...

  • Page 10: Adjustments For Pc Screen Display

    Menu Items Adjustments for PC screen display (5) INPUT Specifies the input mode at power-on. When not specifying, nAutomatic adjustment the screen at the previous power-off appears. Input modes displayed on “PC1/AV1” depend on DVI When you use the PC3 input terminal or PC4 input terminals SELECT settings.

  • Page 11: Initialization (Reset)/Functional Restriction Setting

    Initialization (Reset)/Functional Restriction Setting You can return the settings to their factory-preset values and TEMPERATURE ALERT restrict operations. Selects the notification method for an abnormal temperature. SIZE 1. After pressing for about 5 seconds, press OFF ....Do not notify about an abnormal , and in that order.

  • Page 12: Controlling The Monitor With A Pc (Rs-232C)

    Controlling the Monitor with a PC (RS-232C) Communication conditions You can control this monitor from a PC via RS-232C (COM port) on the PC. You can also connect multiple monitors via a daisy chain by Set the RS-232C communication settings on the PC to match using a PC.
  • Page 13 Controlling the Monitor with a PC (RS-232C) nResponse code format nCommunication interval When a command has been executed correctly • After OK or ERR is returned, you must send the following commands. Return code To set a timeout for the command response, specify 10 , 0A seconds or longer.
  • Page 14 Controlling the Monitor with a PC (RS-232C) nCommands for ID control IDLK ..The parameter of this command sets the ID number of the monitor. The monitor is subject to all The command examples shown on this page assume the subsequent commands. following connection and ID number set up.
  • Page 15 Controlling the Monitor with a PC (RS-232C) nRepeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Example] Set 1 Set 2...

  • Page 16: Rs-232C Command Table

    Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Command field (See page 12.) Direction: W When the “Parameter” is set in the parameter field (see page 12), the command functions as described under “Control/Response Contents”.

  • Page 17: Picture Menu

    Controlling the Monitor with a PC (RS-232C) PICTURE menu Function Command Direction Parameter Reply Control/Response contents AUTO AGIN When the input mode is PC3, PC4. CONTRAST CONT 0-60 0-60 0-127 on PC3/PC4. BLACK LEVEL BLVL 0-60 0-60 0-127 on PC3/PC4. TINT TINT 0-60...

  • Page 18: Setup Menu

    Controlling the Monitor with a PC (RS-232C) SETUP menu Function Command Direction Parameter Reply Control/Response contents OSD H-POSITION OSDH 0-100 0-100 OSD V-POSITION OSDV 0-100 0-100 MONITOR STDR 0: LANDSCAPE, 1: PORTRAIT LANGUAGE LANG ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL РУССКИЙ HDMI AUTO VIEW HDAW 0: OFF, 1: ON...
  • Page 19 Controlling the Monitor with a PC (RS-232C) ENLARGE menu (When the input mode is PC) Function Command Direction Parameter Reply Control/Response contents ENLARGE MODE EMAG 0-4 0: OFF, 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5 EMHV 11-55 11-55 1 x 1 (OFF) to 5 x 5 (“m x n”...
  • Page 20 Controlling the Monitor with a PC (RS-232C) PIP/PbyP menu Function Command Direction Parameter Reply Control/Response contents PIP MODES MWIN 0-3 0: OFF, 1: PIP, 2: PbyP, 3: PbyP2 PIP SIZE MPSZ 1-12 1-12 PIP POS THE LONGEST MHPS 0-100 DIRECTION 0-100 THE SHORTEST MVPS...

  • Page 21: Controlling The Monitor With A Pc (Lan)

    Controlling the Monitor with a PC (LAN) Settings to connect to a LAN Your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification Set the monitor’s IP address and subnet mask to match the when it has a problem.
  • Page 22 Controlling the Monitor with a PC (LAN) ■ To set from a PC 7. Temporarily change the IP address and subnet mask. To access the monitor as it is shipped from the factory, set When the monitor is connected to a PC, LAN settings can be as follows.

  • Page 23: Controlling With A Pc

    Controlling the Monitor with a PC (LAN) Controlling with a PC 5. Click on “LAN SETUP” under NETWORK. ■ B asic operation You use Internet Explorer on a PC on the LAN to control the monitor. 1. Launch Internet Explorer on the PC. 2.
  • Page 24 Controlling the Monitor with a PC (LAN) ■ INFORMATION ■ ADJUSTMENT Information about this monitor appears. You can adjust these settings which are also available on the monitor’s menu. • SCREEN (See page 6.) • PICTURE (See Page 6.) • PICTURE (ADVANCED) (See Page 6.) •...
  • Page 25 Controlling the Monitor with a PC (LAN) ■ NETWORK (LAN SETUP) ■ NETWORK (SECURITY) This screen allows you to set the settings necessary when the This screen allows you to specify the security-related settings. monitor is connected to a LAN. USER NAME / PASSWORD DHCP CLIENT Sets up a user name and password to restrict access to this If your LAN has a DHCP server and you wish to obtain an monitor.
  • Page 26 Controlling the Monitor with a PC (LAN) ■ NETWORK (GENERAL) ■ MAIL (ORIGINATOR) This screen allows you to specify the general LAN settings. This screen allows you to configure the e-mail sent periodically or when the monitor has an error. The settings depend on the configuration of your LAN. Ask your LAN administrator for details.
  • Page 27 Controlling the Monitor with a PC (LAN) ■ MAIL (RECIPIENT) ■ MAIL (PERIODICAL) This screen allows you to specify the recipients of the e-mail When PERIODICAL for CONDITION of MAIL (RECIPIENT) is sent periodically or when the monitor has an error. checked, set the date and time to send the mail. RECIPIENT E-MAIL ADDRESSES DAY OF THE WEEK Specify the e-mail addresses to send error notification e-mail...
  • Page 28 Controlling the Monitor with a PC (LAN) ■ S ERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor. (See page 24.) URL INFORMATION Enter a URL to display when an error occurs on the monitor. Up to 64 alphanumeric characters or symbols can be used.
  • Page 29 PN-S525 G EN08G(1)

This manual is also suitable for:

Pn-s525

Table of Contents