Step 1: Insert 5 volt AC power cord into the wall then into the bottom of
the alarm clock.
Step 2: Insert 2 new AAA Alkaline batteries (not included) into the alarm
clock. Observe the correct polarity.
Restart: If there is no indoor temperature data after 60 seconds, unplug
the AC adapter and remove batteries from the alarm clock, press any
button 20 times. After 15 minutes, return to Step 1 above.
1. Hold the SET button to enter time set mode.
+
2. Press the
3. Press the SET button to confirm adjustments and move
to the next item.
TIME SET ORDER:
1. Hour
2. Minutes
3. Year
4. Month
5. Date
Press the SET button to exit, or wait 20 seconds without pressing
buttons to return to the normal time display.
•
+
Press the
format.
•
-
Press the
Fahrenheit or Celsius.
When using A/C power:
•
Press the LIGHT HI/LOW/OFF button to adjust the
backlight.
When using Battery power only:
•
Press the LIGHT HI/LOW/OFF button for a 10 second backlight.
Model: W88723 www.lacrossetechnology.com/support
GET STARTED
SET TIME & DATE
-
or
buttons to adjust values.
12/24 HOUR TIME FORMAT
button to select 12 hour or 24 hour time
FAHRENHEIT/CELSIUS
button to select temperature readings in
ADJUST BACKLIGHT HI/LOW/OFF
Page | 2