Welcome to the La Crosse Technology® family!
We hope you enjoy your new Projection Alarm.
Table of Contents
2
Let's Get Started
2
Atomic Time
3
Buttons
3
Basic Settings
4
Select Fahrenheit | Celsius
4
Set Alarm Time
4
Activate | Deactivate Alarm
4
Snooze Alarm
5
Projection: Intensity, Rotation
5
Projection Modes:
Time, Temperature
6
Backlight
6
USB Charging Port
Page | 1
www.lacrossetechnology.com/support
6
Temperature Trend Arrows
7
Search for Outdoor Sensor
7
Restart
7
Position TX141v2 Sensor
8
Low Battery Icon
8
Help Us, Help You
8
Let's Get Social
9
Care and Maintenance
9
Warranty and Support
9
Specifications
11
FCC Statement
616-146v3
Lets Get Started
1. Insert 2-AA batteries into your outdoor sensor.
2. Insert the 5 volt power cord into a wall outlet, then into the
clock. Install 2-AAA batteries for backup time and date.
3. After 5 minutes, place the sensor outside in a shaded
location. Configure basic settings.
Atomic Time
• The backlight and USB charging port will momentarily turn off
while the clock searches for the atomic signal.
• After the initial search, your clock will only search for the
atomic signal after midnight.
• The atomic time signal icon (tower) will flash while searching,
and be solid when connected.
• Press -/TIME button anytime, to manually search for the
Atomic time signal.
• For information about WWVB visit:
616-146v3
www.lacrossetechnology.com/support
AAA
AAA
http://bit.ly/AtomicTime
Page | 2