QUICK SETUP The alarm clock is packed in the closed position. To open, flip open the cover. The alarm clock requires one AA Alkaline compartment insert the battery to activate. It will start searching for a signal and set to the correct time and date, usually not until overnight.
DETAILED SETUP GUIDE BATTERY INSTALLATION The alarm clock requires one AA Alkaline battery. Open up the compartment insert the battery to activate. It will start searching for a signal and set to the correct time and date, usually not until overnight.
6:00 am—when there is less atmospheric interference. To keep your time as accurate as possible, the alarm clock conducts a WWVB search every night between these hours, and overrides any manually set time. The WWVB tower icon (appearing in the...
Page 7
Earth’s Ionosphere, reception is very limited during daylight hours. The alarm clock will search for a signal every night when reception is best. The WWVB radio station derives its signal from the NIST Atomic clock in Boulder, Colorado. A team of atomic physicists is...
Page 8
have created an international standard, measuring a second as 9,192,631,770 vibrations of a Cesium-133 atom in a vacuum. PROGRAMMING (includes manual time setting) **To end the programming mode at any time, simply press the SNOOZE button Press the SET button. The US map and time zone will flash (“-5”...
Page 9
“DST On” will flash. Press the “+” key to toggle between the Daylight Saving Time ON or OFF (for places that do not follow Daylight Saving Time changes). Press the SET key. “Sno” will show at the bottom of the screen, and a number will flash at the top.
The year will now flash. Press the “+” key to advance to the correct year. Press the SET key. The month will now flash. Press the “+” key to advance to the correct month. Press the SET key. The date will now flash. Press the “+” key to advance to the correct day.
III. SETTING THE ALARMS La Crosse Technology’s travel alarm clock has two separate alarms that can be set. Each alarm has a distinctive sound and operate independently. Press and hold the “ALM1” (or “ALM2” key) key for two seconds to enter the setting mode.
Page 12
the “ALM1” or “ALM2” key once, depending on which alarm needs to be activated. When the alarm is sounding, pressing the “SNOOZE” will turn it off for the time that was selected in the programming mode (section II.A.2.c.). The snooze is activated by pressing back on the entire unit while the cover is open.
OPERATING SCREENS The exact time will always be displayed in the upper portion of the screen, and the US map will show when the time zone is set to the continental US (with the time zone selected showing in black). The lower portion of the screen has five different screens that can be selected.
Hong Kong, you will need to manually set the hour to the local time. When the clock is back in the US, it will search for a signal and set to the proper time according to the time zone selected.
TROUBLESHOOTING NOTE: For problems not solved, please contact La Crosse Technology via e-mail or phone, visit website, www.lacrossetechnology.com Problem: The time and date will not set initially. Solution: It usually takes overnight before the clock can receive the signal due to the interference the sun has on the WWVB signal.
Do not subject the units to unnecessary heat or cold by placing them in the oven or freezer. • Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology repairs. Do not use solvents or...
Technology immediately upon discovery of any defects covered by this warranty. Before sending the clock in for repairs, contact La Crosse Technology. The clock will be repaired or replaced with the same or similar model. This warranty does not cover any defects resulting...
Page 18
Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. warranty information contact La Crosse Technology, Ltd La Crosse, WI 54601 Phone: 608.782.1610 support@lacrossetechnology.com web: www.lacrossetechnology.com THIS PRODUCT IS...
Need help?
Do you have a question about the WT-2191A and is the answer not in the manual?
Questions and answers