Telstra T48G Quick Start Manuals page 9

Let's get this show on the road
Handset legend
Your Telstra T48G
Getting connected
Bluetooth connectivity
Wi-Fi connectivity
Your contacts
MessageBank
Basic call features
Troubleshooting
Previous Next
Fig 12
• Once the connection has completed successfully, The SSID
will now display the status" "Connected" (Fig 12).
You will need to contact your network administrator for your
Wi-Fi password.
B: Wi-Fi Protected Set up (WPS)
There are 2 options for connecting your Telstra IP Phone via
the Wi-Fi Protected Set up (WPS):
• Push Button Configuration (PBC): The user has to push the
WPS button on both the IP phone and gateway/router to
connect.
• Personal Identification Number (PIN): The user has to enter
a PIN generated randomly by the IP phone on the gateway/
router to connect.
Push Button Configuration (PBC)
To connect to the wireless network using PBC method:
Fig 13
Wi-Fi connectivity
• When phone is in idle state, connect the Wi-Fi dongle
into the USB port on the back of the phone (Fig 13).
• You will be prompted: "Wi-Fi adapter connected.
Scan for available Wi-Fi networks?"
• Select "OK".
Fig 14
Fig 15
• The IP phone will toggle the Wi-Fi on and search for
available wireless networks in your area (Fig 14).
• Optional – Refresh search: To search again for available
networks, tap .
• Whilst the phone is scanning for available networks, long
press the WPS button on the Wi-Fi USB dongle. (Fig 15)
• You will be prompted: "WPS activated. Connecting...120s".
• Long press the WPS button on your gateway/router.
• Once WPS setup has completed successfully,
the SSID will now display the status: "Connected".