Set Up Your User Profile - Telstra T48G Quick Start Manuals

Let's get this show on the road
Handset legend
Your Telstra T48G
Getting connected
Bluetooth connectivity
Wi-Fi connectivity
Your contacts
MessageBank
Basic call features
Troubleshooting
Previous Next
Fig 5
Connect via Power Over Ethernet (PoE)
• Connect the Ethernet cable to the Internet port on the
back of the phone and an available Ethernet port on a
compatible DOT router/switch* (Fig 5).
• Optional – PC Connection: Connect one end of the second
Ethernet cable to the LAN port on the user's PC and the
other end to the PC port on the phone (Fig 5).
* DOT-powered switches are available for purchase, if there are insufficient
Ethernet ports on your DOT router to connect all your devices.

3. Set up your User Profile

The user profile must be set-up before you can use the phone.
• During startup, the "Zero Touch" screen will display Update,
OK or Cancel?
If your phone is attempting to connect to a wireless
network, you will need to manually reboot the phone to
access the startup/"Zero Touch" screen.
• Press to update configuration or to cancel startup.
OK X
Your phone will update configuration setting automatically
after 10 seconds, unless you press .
X
• The LCD screen will cycle display: "Network checking" for
~30 seconds; "Configuration updating" for ~1 minute;
"Welcome... Initialising... Please wait" for ~1 minute;
"Network checking..." for ~5 seconds.
Getting connected
Fig 6
• You will be prompted for your admin details (Fig 6) –
please ensure you follow the next steps correctly.
− Refer to the Configuration Summary that was sent to
your DOT registration email.
− Refer to section "Device type: T48G" for your User ID
and Password.
• Enter your User Name and Password select
the set up.
Fig 7
• The LCD screen will revert to the home display screen
(Fig 7) – your phone is ready for use.
to complete