Telstra T48G Quick Start Manuals page 10

Let's get this show on the road
Handset legend
Your Telstra T48G
Getting connected
Bluetooth connectivity
Wi-Fi connectivity
Your contacts
MessageBank
Basic call features
Troubleshooting
Previous Next
Personal Identification Number (PIN)
To connect to the wireless network using PIN method:
Fig 16
• When phone is in idle state, connect the Wi-Fi dongle
into the USB port on the back of the phone (Fig 16).
• You will be prompted: "Wi-Fi adapter connected.
Scan for available Wi-Fi networks?"
• Select "OK".
Fig 17
• The IP phone will toggle the Wi-Fi on and search for
available wireless networks in your area (Fig 17).
Wi-Fi connectivity
• Optional – Refresh search: To search again for available
networks, tap .
• Tap and select PIN.
• You will be presented with a randomly-generated PIN.
Fig 18
• Tap OK (Fig 18).
• You will be prompted: "WPS activated. Connecting...120s".
• From a PC or laptop connected to the DOT router / switch,
open up a web browser and enter in the DOT router address.
• Locate the Wireless Protected Setup configuration menu.
• Enter the PIN in the corresponding field to enable the setup
of wireless devices via PIN.
• Click the corresponding button in the router's web interface
to search clients.
• Once WPS setup has completed successfully, the gateway/
router's web interface will prompt success.