Table of Contents
Advertisement
2.3 TESTING KLIC-DI FROM AN IR REMOTE
KLIC-DI incorporates –next to the LED indicator– an infrared receiver that may be used
together with any of the Zennio IR remotes (such as models ZN1IRZ38 and
ZN1IRZAS) to check the proper control of the A/C machine from KLIC-DI.
Note: KLIC-DI will only respond to infrared orders under the programming mode (i.e.,
with the red component of the LED on).
The action performed by each button of the IR control is shown in Figure 4.
ON/OFF
Switch
Modes
Temperatures
[17-32ºC]
http://www.zennio.com
OFF
ON
Heat Cool
Fan Dry
19ºC 20ºC
17ºC 18ºC
21ºC 22ºC
23ºC 24ºC
25C 26ºC
27ºC 28ºC
29ºC 30ºC
31ºC 32ºC
Figure 4. Testing KLIC-DI from the IR remote
Fan speed
Technical Support:
http://support.zennio.com
KLIC-DI VRV
11
Advertisement
Table of Contents
