Adding Toner - Sharp AR-287 Operation Manual

ADDING TONER

The message "
" will appear in the message display before the toner
supply is completely empty. If copying is continued, copies will
gradually become lighter until the copier stops and the message
display changes to "
indicating that the toner supply is empty. Toner can be added any time
after the message "
" appears. To add toner, stop the copier and proceed as
below. When either message appears, you can use the INFORMATION
key for detailed information as necessary.
During long copy runs of multiple originals containing many images
and/or dark shades, "
appear and the copier will stop making copies even though toner is left.
The copier will automatically cycle and replenish the toner to the
normal level and then the START key indicator will light up. Press the
START key to resume copying.
5X
20X
Open the front cover.
1
Pull down the toner hopper lock lever and pull the toner
2
hopper out slowly until it stops.
Tap on the top of the toner cartridge 5 times. Hold the
3
20X
new toner cartridge vertically and vigorously shake it
up and down about 20 times, then invert the cartridge
and again shake it up and down about 20 times. This will
loosen the toner and allow it to flow more easily into the
toner hopper.
For best copying results, be sure to use
only Sharp Genuine Supplies which are
designed, engineered, and tested to
maximize the life and performance of
" Sharp copiers.
Look for the Genuine Supplies label on
the toner package.
" will
GENUINE SUPPLIES
4-5