Operation Panel - Sharp AR-287 Operation Manual

PART NAMES AND FUNCTIONS

Operation Panel

PRINT
COPY
The key and indicators
are not used for the
copier features.
LCD touch panel
Displays information to assist the operator.
Various operation keys are included in the touch
panel depending on the particular screen being
displayed.
10-key pad
Used to set the copy quantity.
INTERRUPT key and indicator (p. 2-20)
Interrupts a copy run.
CLEAR ALL ( ) key
CA
Clears all selected settings and returns the copier
to the initial settings.
COPY key
Press during standby to display the total output
count.
AUDIT CLEAR key
Closes an open account.
PROGRAM ( ) key (p. 2-18)
P
Press to select the job memory mode.
CLEAR ( ) key
C
Press to clear the copy quantity display, or press
during a copy run to terminate copying. The
copier will stop after copies in progress are
finished.
6-4
1 2 3
INTERRUPT
4 5
6
7 8 9 CLEAR
C
AUDIT CLEAR PROGRAM
0
P
START key and indicator
Copying is possible when the indicator is on.
Press to start copying.
SPECIAL MODES key (p.3-1)
Press to select special functions.
Message display
Messages are displayed regarding copier status
and operation.
Function setting icons (p.1-9)
Icons appear depending on the special functions
selected.
Paper size display
The sizes of loaded copy paper are displayed and
the selected paper feed location is highlighted.
indicates the amount of copy paper.
Copy quantity display
Displays the specified number of copies.
Original size display
The original paper size is displayed.
INFORMATION key (p. 1-7)
Press for operation guidance on use of various
features of this copier.
Press for guidance when a misfeed occurs, when
adding toner, or when used toner must be
disposed of.
CLEAR ALL
CA
START