Sharp AR-287 Operation Manual page 60

IMAGE EDITING FUNCTIONS
CANCEL OK
BORDER LINE
4
16
OK
CANCEL OK
BORDER LINE
4
16
1 2 3
4 5
6
7 8 9
AUDIT CLEAR
PROGRAM
0 P
INTERRUPT
CLEAR ALL
CA
START
CLEAR
C
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO 11 17
EXPOSURE PAPER SELECT
3-26
Select a type of border line.
7
Select the solid line, broken line or no border line.
Press the upper "OK" key.
8
Make all other desired copier selections and enter the
9
INTERRUPT
desired number of copies.
If the required area of the originals is not included on the copies,
select a proper reduction ratio.
CLEAR
C
Press the START key.
10
If the document feeder is used, scanning of originals and copying
will start.
If the document glass is used in the SORT mode, proceed to the
next step.
Replace the finished original with the next original after
11
the START key indicator lights up, and then press the
START key. Repeat this step until all originals have been
scanned. Then, press the "READ-END" key on the touch
READ-END
panel.
AUTO IMAGE
Copying will start at this time.
100%
COPY RATIO
Up to 120 sheets of 8-1/2" x 11" originals or up to 60 sheets of
originals larger than 8-1/2" x 11" can be scanned.
To cancel the REPEAT COPY function, select the REPEAT
COPY function again and press the "CANCEL" key.