Cleaning; Cleaning The Housing; Cleaning The Air Intake Grille - Silvercrest SHTT 2200 B1 Operating Instructions Manual

Cleaning

RISK OF ELECTRIC SHOCK
► Always remove the plug from the mains power socket before cleaning the
appliance.
► UNDER NO CIRCUMSTANCES should you immerse the appliance in
water or other liquids during cleaning!
► After being cleaned, the hairdryer must be completely dry before using it
again.
WARNING – RISK OF INJURY!
► Allow the appliance to cool suffi ciently before cleaning it.
CAUTION – PROPERTY DAMAGE!
► Do not use any aggressive cleaning liquids or solvents. They could damage
the surface.

Cleaning the housing

■ Use a soft cloth lightly moistened with a mild soap solution to clean the housing
and attachments.
■ Dry all parts thoroughly before re-using the appliance.

Cleaning the air intake grille

WARNING – RISK OF FIRE!
Clean the air intake grille 2 at regular intervals with a soft brush.
►
1) Turn the air intake grille 2 anticlockwise a little way so that it can be
removed from the hairdryer.
2) Clean the grille on the appliance and the grille on the air intake 2 using a
soft brush.
3) Push the air intake grille 2 back onto the hairdryer so that the tabs on the
air intake grille 2 click back onto the recesses on the hairdryer housing.
Turn the air intake grille 2 clockwise a little way so that it clicks into place
and sits tightly.
SHTT 2200 B1 │ 21 ■
GB